The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024

Latest message you have seen: RE: BT Going the same way as AOL?


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: scart b&w problems



I have spokent to Amar.

The reason his portable TV gave colour with the RGB signal is that most
devices actually output Composite Video as the sync rather than pure
CompositeSync.

He is using KAT5 for distribution as S-video and I am sending him a couple
of components to fit into  a SCART plug to convert the S-Video to Composite
for the TV. Mark McCall has had this setup running for about a year.

Keith

www.diyha.co.uk
www.kat5.tv


-----Original Message-----
From: Steve Morgan [mailto:wormpurple@xxxxxxx]
Sent: 11 May 2002 21:23
To: ukha_d@xxxxxxx Subject: RE: [ukha_d] scart b&w problems


Amar,

Your portable TV doesn't support S-Video but does appear to support RGB.
To have both the TV and projector working properly, you could try one of
two options...

1) (The cheap option) Use a S-Video<-->Composite adapter available from
Keene Electronics or Maplin to convert the S-Video output from the DVD
to composite video. Quality will be far from optimal, but it's cheap and
you might not notice on the portable.

2) (The better, more expensive option) Get and RGB-to-S-Video convertor
(from http://www.rgbtosvideo.com), set the output from your DVD to RGB
and use the convertor to drive the projector. A number of us use these
to good result.

Regards,
Steve

-----Original Message-----
From: Amar Nagi [mailto:amar@xxxxxxx]
Sent: 11 May 2002 19:19
To: ukha_d@xxxxxxx Subject: [ukha_d] scart b&w problems


I am having great problems hooking up the following

I have pioneer dvd 737 with two scart outs one for tv and one call av2
in/out

I have a project which only takes svideo and a tv with scart.
I using KAT 5 to distribute the dvd around the flat.
KAT5 only takes scart. I have a setting on the dvd
Which says video out(RGB), (s-Video),(video),(component)

And you can set which one you want.

Only when it is set to s-video will it be color on the probjector
But it comes out b&w on my Panasonic portable tele.
If I set it to (RGB) it comes out color on the portable tele
And b&w on the projector ARGH !

How can I get around this, what is going on ?



For more information: http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx Subscribe:  ukha_d-subscribe@xxxxxxx Unsubscribe:  ukha_d-unsubscribe@xxxxxxx List owner:  ukha_d-owner@xxxxxxx
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/



Yahoo! Groups Sponsor
ADVERTISEMENT
Height:   4 5 6 7  ft 0 1 2 3 4 5 6 7 8 9 10 11 in
Weight:  
Sex:   F M

For more information: http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe:  ukha_d-subscribe@xxxxxxx
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
List owner:  ukha_d-owner@xxxxxxx

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

Home | Main Index | Thread Index

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.