The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024

Latest message you have seen: RE: OT?: Radio Shack in the UK


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: WiFi Install, APC SmartUPS and HV now not working............


  • To: <ukha_d@xxxxxxx>
  • Subject: RE: WiFi Install, APC SmartUPS and HV now not working............
  • From: "Ray Barnett" <ray.barnett@xxxxxxx>
  • Date: Sun, 17 Mar 2002 20:15:26 -0000
  • Delivered-to: mailing list ukha_d@xxxxxxx
  • Mailing-list: list ukha_d@xxxxxxx; contact ukha_d-owner@xxxxxxx
  • Reply-to: ukha_d@xxxxxxx

It sounds very much like you've installed some software to your PC that has
overwritten some common files (MSVCRT.DLL) with older versions than were
already there.

The easiest solution is to try re-installing the HV or Powerchute software
-
which should then replace the files with the correct versions. If that
doesn't work. Try a google or Microsoft search for the files in question
and
download the newer versions. Preserve copies of the files you are
overwriting by copying them to another folder, just in case.

p.s. It's not particularly a Microsoft problem - it sounds as though the
setup program for the WiFi card software is being a bit dim.

HTH, Ray Barnett


-----Original Message-----
"Entry Point Not Found", "The Procedure entry point
??_U@YAPAXI@Z could not
be located in the dynamic link library MSVCRT.dll"







Home | Main Index | Thread Index

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.