The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: IR systems, the choices


  • To: <ukha_d@xxxxxxx>
  • Subject: RE: IR systems, the choices
  • From: "Nikola Kasic" <nikola@xxxxxxx>
  • Date: Fri, 19 Jul 2002 11:29:29 +0100
  • Mailing-list: list ukha_d@xxxxxxx; contact ukha_d-owner@xxxxxxx
  • Reply-to: ukha_d@xxxxxxx

Yes, I've got you.
Then if you are using same cable for transmitter and receiver, I asume that they must be in the same housing. Where to find such Tx/Rx devices?
Nik
-----Original Message-----
From: Steve D [mailto:steve@xxxxxxx]
Sent: 19 July 2002 10:30
To: ukha_d@xxxxxxxSubject: Re: [ukha_d] IR systems, the choices

No, all 7 nodes would be connected to the same three wire bus network, and at one end of this network the three wires which make up the RS485 network, are converted into RS232, which then plugs into the serial port.
 
 
like this
 
 
            NODE 2                NODE 1                RS485/232========PC
            I  I  I                        I  I  I                      I  I  I
------------I--I--L-----------------------I--I--L---------------------I--I--I
------------I  L--------------------------I---L-----------------------I--I
------------L-----------------------------L--------------------------I
 
do you see what I mean?
 
Havnt got time at the moment to do a proper drwaing with paint, but I hope that shows what the network would be like.
 
HTH
Steve
----- Original Message -----
Sent: Friday, July 19, 2002 1:44 AM
Subject: RE: [ukha_d] IR systems, the choices

So, if you want to have 7 zones (rooms), where do you connect them to?
7 serial ports?
Nik
-----Original Message-----
From: Ian B [mailto:Ian@xxxxxxx]
Sent: 18 July 2002 21:54
To: ukha_d@xxxxxxx
Subject: RE: [ukha_d] IR systems, the choices

>How your system topology looks like? You connect all the Tx/Rx units into
>your IR controller, I suppose, and then connect your controller via serial
>port to PC. Is that right?
>
>>>>Yep pretty much as I see it. They are all separate nodes on a 3 wire
>RS485 network which goes back to the computer to do most of the work, this
>enables easy programming of them so you don't have to reprogram each PIC
>chip, which would take a while, and need good coding skills in C.

This mystical controller does not exist unless you consider the PC as it.
All the units are standalone (you need two to make anything happen though)
and when connected to a PC will become a very powerful system - or that's
the plan anyway.

All my stuff is programmed in assembler!! Only the PC app will be high level
e.g. VB

Well said on the rest Steve.

Ian B

>-----Original Message-----
>From: Steve D [mailto:steve@xxxxxxx]
>Sent: 18 July 2002 09:48
>To: ukha_d@xxxxxxx>Subject: Re: [ukha_d] IR systems, the choices
>
>
>----- Original Message -----
>From: Nikola Kasic
>To: ukha_d@xxxxxxx>Sent: Wednesday, July 17, 2002 11:57 AM
>Subject: RE: [ukha_d] IR systems, the choices
>
>O.K.
>I've got the picture. That means that you can even convert signals if you
>have 3 Sony TVs so you can send for Lounge Panasonic code for Volume+ and
>your system will convert into Sony Volume+ and send in Lounge only. If you
>send Sony Volume+ it will not convert it but send to bedroom only. If you
>send Grundig Volume+, it will be converted into Sony Volume+ and send into
>Bedroom 2 only. For source, you'll need ideally, something like Pronto.
>
>>>>You will be able to script the commands based on events, say if
>you had a
>sony tv in the bedroom, and you where in the bedroom and you put the volume
>+ the RX part of the unit would pick this up and then do nothing,
>as you are
>using the remote for the tv in the room, so you would not want this command
>sent else where. A pronto would be the best option to control each item
>individually from one location.
>
>Now, my question is how many wires you need for Tx, and how many
>for Rx? You
>are talking about Tx/Rx units, so it seems like a single unit.
>
>>>>It is on a BUS network, so you need three wires going into the unit, and
>three wires coming back out, also you need 12 power to it, so
>thats an extra
>two wires.
>Which totals 8
>
>Will then single Cat5 be enough for connecting it?
>
>>>> Yes, all patched back to a central location the right wires
>connected up
>so it's in a bus configuration and they have power, and one end of the BUS
>(three wires) being connected to a RS485 to RS232 convertor to a pc to
>control the scripting.
>
>How they must be placed to prevent looping?
>
>>>>>They have inbuilt protection for this (or they will) and it is all
>scripted, so in theory you can protect it yourself using timers.
>
>Where can I find those Tx/Rx units?
>
>>>> Ian B is building and designing them himself, they are not off the
>shelf, and are a unigue specif design to accomadate the indvidual
>addressing
>ofr each TX/RX combo unit.
>
>A saw them in many shapes on pictures on people's web sites. I
>would like to
>know if they can be flush mounted in an switch box, so I can put cable in
>place and cut boxes and cover them with blank faceplates, until I get Tx/Rx
>units?
>Where can I buy them anyway? I see that they are mostly homemade.
>Can I find
>finished products anywhere?
>
>>>>>See above
>
>How your system topology looks like? You connect all the Tx/Rx units into
>your IR controller, I suppose, and then connect your controller via serial
>port to PC. Is that right?
>
>>>>Yep pretty much as I see it. They are all sepereate nodes on a 3 wire
>RS485 network which goes back to the computer to do most of the work, this
>enables easy progamming of them so you don't have to reprogram each pic
>chip, which would take a while, and need good coding skills in C.
>
>Cheers,
>Nik
>
>
>>>>>>HTH Steve
>I am sure Ian B can correct me if I have got any of this wrong.
>
>
>
>For more information: http://www.automatedhome.co.uk
>Post message: ukha_d@xxxxxxx>Subscribe:  ukha_d-subscribe@xxxxxxx>Unsubscribe:  ukha_d-unsubscribe@xxxxxxx>List owner:  ukha_d-owner@xxxxxxx>
>Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>



For more information: http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe:  ukha_d-subscribe@xxxxxxx
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
List owner:  ukha_d-owner@xxxxxxx

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.


For more information: http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe:  ukha_d-subscribe@xxxxxxx
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
List owner:  ukha_d-owner@xxxxxxx

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.


For more information: http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe:  ukha_d-subscribe@xxxxxxx
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
List owner:  ukha_d-owner@xxxxxxx

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

Yahoo! Groups Sponsor
ADVERTISEMENT

For more information: http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe:  ukha_d-subscribe@xxxxxxx
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
List owner:  ukha_d-owner@xxxxxxx

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

Home | Main Index | Thread Index

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.