The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: Multizone ir testing update


  • To: <ukha_d@xxxxxxx>
  • Subject: RE: Multizone ir testing update
  • From: "Nikola Kasic" <nikola@xxxxxxx>
  • Date: Tue, 16 Jul 2002 14:27:50 +0100
  • Mailing-list: list ukha_d@xxxxxxx; contact ukha_d-owner@xxxxxxx
  • Reply-to: ukha_d@xxxxxxx

Are the transmitter and receiver placed next to each other in each rome (zone).
I don't see transmitters on your pictures, just 3 receivers.
Do you connect one cable for transmitter and one for receiver, or you can use the same cable for both it they are in the same casing?
Nik
 
 
 
 -----Original Message-----
From: Frank Mc Alinden [mailto:armagh@xxxxxxx]
Sent: 16 July 2002 14:10
To: ukha_d@xxxxxxxSubject: Re: [ukha_d] Multizone ir testing update

Hi Nik
        I have both . I have built a 8 zone tx unit and a 8 zone rx unit and they are controlled by Homevision . The cabling is based around Cat5.
Have a look at my website under Homevision. www.users.bigpond.com/armagh/
 
Frank Mc
----- Original Message -----
Sent: Tuesday, July 16, 2002 10:56 PM
Subject: RE: [ukha_d] Multizone ir testing update

Frank,
Do you have IR transmiters only, or receivers as well?
Which cable do you use?
Cheers,
Nik
-----Original Message-----
From: Frank Mc Alinden [mailto:armagh@xxxxxxx]
Sent: 16 July 2002 13:43
To: ukha_d@xxxxxxx
Subject: [ukha_d] Multizone ir testing update

Hi All
        Just a quick update on my prototype testing . Well ive programmed ir codes for 2 zones into Homevision and have  programmed the ir actions macros to verify the recieving zones and if correct retransmit ir code . All working ok so far ,had to relearn a couple of ir signals that hv wouldnt respond to (now ok) . Had a bug on my pic software which i think ive sorted .Last nite i wrote my first hv schedule event which at 11.30 pm tests the"power on "  flags of my bedroom tv (zone 1) and dvd (zone 3) and sends the power ir code to turn off if flags are set. So Far so good.
 
Frank Mc 


For more information: http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe:  ukha_d-subscribe@xxxxxxx
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
List owner:  ukha_d-owner@xxxxxxx

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.


For more information: http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe:  ukha_d-subscribe@xxxxxxx
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
List owner:  ukha_d-owner@xxxxxxx

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.


For more information: http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe:  ukha_d-subscribe@xxxxxxx
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
List owner:  ukha_d-owner@xxxxxxx

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

Yahoo! Groups Sponsor
ADVERTISEMENT

For more information: http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe:  ukha_d-subscribe@xxxxxxx
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
List owner:  ukha_d-owner@xxxxxxx

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

Home | Main Index | Thread Index

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.