Re: Re: PC audio through hi-fi

[Andy Laurence <andy@xxxxxxx>]

> > Iv'e done this before but not to the phono input of the amp, it
was
> > to either the CD or TAPE inputs. I didn't want to take a chance
on
> > blowing the PHONO input of my amp.
>
> What's the difference? Also what was the quality like?

One's a line level input, and the other is a lower level input.  The
phono 
input will have a pre-amp connected to it before it goes into the main 
amplifier.  This is all internal.  Suffice to say that you should
only 
connect a record deck to a phono input.

Of course, this is taking phono to mean the name of the input, and most
probably the label next to it, rather than meaning the name of the 
connectors.  Confusingly, the connectors are called phono connectors,
and 
the input used for record decks is called a phono input.  Two
different 
meanings.

Andy (probably confusing the issue)
-- 
Building a community network for Bristol
http://consume.andylaurence.co.uk
- updated 03/07
4x4 in town - bog brush for your teeth
NB: Alternate E-Mail - andylaurence at yahoo dot co dot uk


For more information: http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx 
Subscribe:  ukha_d-subscribe@xxxxxxx 
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx 
List owner:  ukha_d-owner@xxxxxxx

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.