Re: Rewiring - IR er I Almost forgot

["Frank Mc Alinden" <armagh@xxxxxxx>]

Title: Message

OOOOPS forgot

 Go to Home vision all links are there sorry

 

 

Frank Mc

----- Original Message -----

From: Frank Mc Alinden

To: ukha_d@xxxxxxx

Sent: Saturday, July 06, 2002 12:30 AM

Subject: Re: [ukha_d] Rewiring - IR er I Almost forgot

Hi Neil

         If your looking for an interim cheap solution till Keiths Kat5 system is available and can use a soldering iron and have some basic electronic skills have a go at my tx and rx circuits. It will use cat5 cable so  you can use the same wiring when Kat5 switcher is available. If interested have a quick look .

www.users.bigpond.com/armagh/

----- Original Message -----

From: Frost Neil

To: 'ukha_d@xxxxxxx'

Sent: Saturday, July 06, 2002 12:23 AM

Subject: RE: [ukha_d] Rewiring - IR er I Almost forgot

So, I put IR receivers in the room "somewhere", these are then connected to an Amplifier or splitter? Or both?

 

Would you connect it up to a splitter, which I assume would have enough emitters to control the AV equipment (are some hardwired? i.e. no emitter), then put the emitters over the "eye" of the equipment to be controlled?  

 

Or do I put the IR receivers in leave the wires dangling in node 0 and wait for Mr Doxey to weave his magic?

 

Neil

If you are using the Xantech gear, just about anywhere Neil, the reception is great on the RX units. I can point the Pronto in the rough direction of the opposite wall from one receiver from outside the room and the IR is still received just fine. I would imagine that Mr Doxey has the problem pretty much sorted in that regard too! ;)

 

One thing to watch is interference as I was talking to Nigel about earlier.

 

HTH

 

K.

For more information: http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe:  ukha_d-subscribe@xxxxxxx
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
List owner:  ukha_d-owner@xxxxxxx

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

For more information: http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe:  ukha_d-subscribe@xxxxxxx
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
List owner:  ukha_d-owner@xxxxxxx

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

For more information: http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe:  ukha_d-subscribe@xxxxxxx
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
List owner:  ukha_d-owner@xxxxxxx

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

Yahoo! Groups Sponsor

For more information: http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe:  ukha_d-subscribe@xxxxxxx
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
List owner:  ukha_d-owner@xxxxxxx

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.