The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: 2.4ghz video sender IR problem



John Risby wrote:

> that's basically what i have - if i understand you correctly. the ir
> emitter is on the end of a cable with plugs into the transceiver - i
> position that in front of the digibox.

I've got a couple of different sorts - the ones which came with my
2.4GHz wireless sender are little square blocks with a self adhesive
side and the wire hanging out the bottom. The other ones which came with
Tivo are plastic sticks with a bare IR LED on the end of it, the wire is
then out the end of the plastic stick.

Letsautomate sell seperate IR emitters...
http://letsautomate.com/10063.cfm the Xantech Blink ones look like they
are the stick on the front of a device type, and the Smartlinc Blaster
seems more like the Tivo one but without an actual stick... just the
bare LED.

If you still have major problems, getting one of the Smartlinc Blasters
might help as it claims to flood an area of 4 feet, so could be a bit to
the side and give decent coverage I'd think.

--
Doogie




Yahoo! Groups Sponsor

For more information: http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe:  ukha_d-subscribe@xxxxxxx
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
List owner:  ukha_d-owner@xxxxxxx

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

Home | Main Index | Thread Index

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.