[Date Prev][Date
Next][Thread Prev][Thread Next][Date
Index][Thread Index]
RE: IRDA repeater
- To: <ukha_d@xxxxxxx>
- Subject: RE: IRDA repeater
- From: "Keith Doxey" <ukha@xxxxxxx>
- Date: Fri, 11 Jan 2002 22:03:45 -0000
- Delivered-to: mailing list ukha_d@xxxxxxx
- Mailing-list: list ukha_d@xxxxxxx; contact
ukha_d-owner@xxxxxxx
- Reply-to: ukha_d@xxxxxxx
I soldered wire to the chips and then mounted them in an IC socket so that
I
could plug it into a breadboard.
You have to be REALLY quick at soldering the other end of the wire to the
IC
socket otherwise the heat travels to the chip, melts the solder and that
end
of the wire falls off.
How do I know this.....coz it happened to me :-(
Watch out for shorts and burnt fingers as well. Bloody surface mount. ring
back tagstrips on 0.25 inch centres!!!
As for small, normal surface mount is useable compared to the ultrasmall
stuff they are doing now.
Keith
-----Original Message-----
From: Ian B [mailto:Ian@xxxxxxx]
Sent: 11 January 2002 19:40
To: Ukha_d
Subject: [ukha_d] IRDA repeater
Well guys and gals
The chips I ordered to try playing with turned up today and guess what, two
of the three are surface mount. Apart from soldering wires to the pins does
anyone have any idea how to attach these things. To say they are tiny is an
understatement. I am not sure my soldering skills are up to it.
Ideas please
Ian
For more information: http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe: ukha_d-subscribe@xxxxxxx
Unsubscribe: ukha_d-unsubscribe@xxxxxxx
List owner: ukha_d-owner@xxxxxxx
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
Home |
Main Index |
Thread Index
|