[Date Prev][Date
Next][Thread Prev][Thread Next][Date
Index][Thread Index]
Re: Telephone Over Cat5
- To: ukha_d@xxxxxxx
- Subject: Re: Telephone Over Cat5
- From: "baker_darren" <darren@xxxxxxx>
- Date: Tue, 26 Feb 2002 16:58:35 -0000
- Delivered-to: mailing list ukha_d@xxxxxxx
- Mailing-list: list ukha_d@xxxxxxx; contact
ukha_d-owner@xxxxxxx
- Reply-to: ukha_d@xxxxxxx
See the pic below of the back of my phone patch panel. The feed from
my BT master socket is coming in from the right.
http://www.darrenhome.co.uk/images/btpatch.jpg
Cheers,
Darren
--- In ukha_d@y..., "James, Daniel" <daniel.james@e...>
wrote:
> opps, this should read:
>
> The rear of THE patch panel is where you connect your CAT5 to,
each RJ45
> socket on the front of the panel has a corresponding IDC punchdown
strip on
> the rear of the panel.
>
> I'll take the example of Pin1 (as its the same for all)
>
> Connect all 6 Pin1s together by punching down a cable into Pin1
Socket1,
> then punching this cable into Pin1 Socket 2 etc., now repeat this
process
> for the other 5 cables and then all the sockets will be wired
together.
>
> Then take a feed from your BT socket, and connect this to one of
the
> punchdown areas for one of above sockets(1-6), and hey presto, you
now have
> 6 live
> extensions on your patch panel.
>
> HTH
>
> Daniel
>
>
> ***********************************************************
> This message is confidential and intended for the exclusive
> use of the addressee(s) only and remains the property of
> Exchange FS Group plc. You should not disclose its contents
> to any other person. If you are not the intended recipient
> please notify the sender named above immediately.
>
> Registered Office: Munro House, Portsmouth Road, Cobham,
> Surrey, KT11 1TE. Registered in England No. 2596452
> ***********************************************************
Home |
Main Index |
Thread Index
|
