The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: RemoteCentral, CCF, Discrete Codes


  • To: ukha_d@xxxxxxx
  • Subject: Re: RemoteCentral, CCF, Discrete Codes
  • From: "rectorydp" <dpullen@xxxxxxx>
  • Date: Tue, 26 Feb 2002 13:49:40 -0000
  • Delivered-to: mailing list ukha_d@xxxxxxx
  • Mailing-list: list ukha_d@xxxxxxx; contact ukha_d-owner@xxxxxxx
  • Reply-to: ukha_d@xxxxxxx

The second word, i.e. 0071 is the frequency of the IR carrier based
on the Pronto internal clock.

Frequency (kHz) = 1000/(decimal value of word * 0.241246).

in this case 36.68kHz

The next two words are the number of "Burst pairs" in sequence 1
and
2 respectively (in the example there is no sequence 1). The sequences
then follow. Note this info applies to learned codes in the Pronto
using Pulse Width Modulation.

All this and much more is described in Barry Gordon's document  -
Pronto Data Base Generator (found on Remote Central).

HTH

David

--- In ukha_d@y..., "James, Daniel" <daniel.james@e...>
wrote:
> It looks like this:
>
> 0000 0071 0000 0032 0080 003f 0010 0010 0010 0030 0010 0010 0010
0010 0010
> 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010
0010 0010
> 0010 0010 0010 0030 0010 0010 0010 0010 0010 0010 0010 0010 0010
0010 0010
> 0010 0010 0010 0010 0010 0010 0010 0010 0030 0010 0010 0010 0010
0010 0010
> 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010
0030 0010
> 0030 0010 0030 0010 0030 0010 0030 0010 0010 0010 0010 0010 0010
0010 0030
> 0010 0030 0010 0030 0010 0030 0010 0030 0010 0010 0010 0030 0010
0a98
>
> (and it looks like hex to me)
>
> Not sure about the carrier bit....
>
> Daniel
>




Home | Main Index | Thread Index

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.