Re: Remote DDAR control - It's here and it works

["Simon Coates" <ecolume@xxxxxxx>]

Did you download tarmerge and unzip it???
The receiver_patch.arf file is a PATCH file.
You need to merge it with your existing DDAR receiver.arf file using the
tar
merge utility.
The new receiver file you generate should then be renamed to 'receiver.arf'
or 'mercury.arf. (depending on your software)

Hope this helps

Simon

----- Original Message -----
From: Brian G. Reynolds <brian.g.reynolds@xxxxxxx>
To: <ukha_d@xxxxxxx>
Sent: 09 February 2002 17:25
Subject: RE: [ukha_d] Remote DDAR control - It's here and it works


> I'm very pleased yours works because my DDAR DOES NOT!!!
>
> Here's what I did,
>
> I went to http://empeg.dyndns.org/receiver/Feb_2002/
and downloaded
> receiver_patch.zip,
> I extracted this and copied the receiver_patch.arf file into the
C:\Program
> Files\Audio Receiver folder, re named the existing receiver file and
re
> named the patch file to receiver.arf.
>
> Closed the manager re started it, removed the power to the DDAR re
connected
> the power and switched the DDAR on, nothing! just sits there
> "initializing".....
>
> Bugger!
>
> B.
>
> > -----Original Message-----
> > From: Simon Coates [mailto:ecolume@xxxxxxx]
> > Sent: 09 February 2002 16:54
> > To: ukha_d@xxxxxxx
> > Subject: Re: [ukha_d] Remote DDAR control - It's here and it
works
> >
> >
> > I've just done the patch for the DDAR and it's brilliant!
> > It's so fast - no latency at all.  The browser remote is amazing
> > - pointing
> > and clicking on the relevant buttons even works - even the power
> > button - so
> > I can turn on the DDARs anywhere in the house and select the
music,
volume
> > etc... as if I was stood next to it!
> >
> > This is a must for anyone with a DDAR
> >
> > I wonder if there'll be a patch to display the DDAR facia in the
future?
> >
> > Simon
> >
> > PS. receiver.arf may be mercury.arf on some software - just use
> > the tarmerge
> > software as normal but merge mercury.arf with the patch and
rename
> > receiver_new.arf to mercury.arf.  Remember to unplug your DDAR so
it
> > re-initialises.
>
>
>
> For more information: http://www.automatedhome.co.uk
> Post message: ukha_d@xxxxxxx
> Subscribe:  ukha_d-subscribe@xxxxxxx
> Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
> List owner:  ukha_d-owner@xxxxxxx
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>