[Date Prev][Date
Next][Thread Prev][Thread Next][Date
Index][Thread Index]
Phone extension question
- To: ukha_d <ukha_d@xxxxxxx>
- Subject: Phone extension question
- From: Robin Edwards <robin@xxxxxxx>
- Date: Sat, 09 Feb 2002 08:58:15 -0500
- Delivered-to: mailing list ukha_d@xxxxxxx
- Mailing-list: list ukha_d@xxxxxxx; contact
ukha_d-owner@xxxxxxx
- Reply-to: ukha_d@xxxxxxx
Can somebody help with following please. I want to run a phone
extension from
a socket on ground floor to my study two floors up (in roof). The route
is a pain but
over last few months as I've been lifting boards etc I gradually fed a
cable thru, but
there are no terminators on it. The cable is what was left after my
home highway was
installed. so I think it has 8 cores. (Brown,Orange, Blue and Green,
plus 4 white with
coloured tracers).
I have a couple of sockets, but they have numbered terminals 1 thru 6.
I bought a pack of plugs that crimp on the end with pliers and a
small metal die, but
this takes 4 cores. With the spring on the left and the copper(?)
contacts visible above
which do I connect to what, assuming I number the connectors in the plug
1 thru 4 with
4 closest to the spring on the side?
Thanks for any help in advance, regards, robin
Home |
Main Index |
Thread Index
|