[Date Prev][Date
Next][Thread Prev][Thread Next][Date
Index][Thread Index]
RE: Swish problems
- To: <ukha_d@xxxxxxx>
- Subject: RE: Swish problems
- From: "Phil Harris" <phillip.harris1@xxxxxxx>
- Date: Wed, 6 Feb 2002 14:08:58 -0000
- Delivered-to: mailing list ukha_d@xxxxxxx
- Mailing-list: list ukha_d@xxxxxxx; contact
ukha_d-owner@xxxxxxx
- Reply-to: ukha_d@xxxxxxx
> The curtains randomly open/close.
> If the vacum cleaner (and ONLY the vac, no other appliance)
> is plugged into the ring socket before the curtains spur,
> turning it on will open/close the curtains.
>
> I have checked homeseers log, and NO x10 activity is being
> detected at the time.
>
> I seem to remember in my college days mention of a decoupling
> capacitor to stop induced currents in long LV cable runs, but
> cant remebre the details. Would this solve the problems??
> Any other thoughts??
If you remove then reapply the power to a Swish motor it changes state
.... If I plug our Dyson into the strip that feeds my curtain motor in my
PC room I can *SOMETIMES* get it to do the same. I'm assuming that it is
because the switch on surge gives enough of a voltage drop for the
curtain motor to think it has been power cycled...
Phil
Home |
Main Index |
Thread Index
|