The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024

Latest message you have seen: RE: Fujitsu Tablets : G's Fuji Assistance Pack


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: 2 Sky+ Boxes


  • To: <ukha_d@xxxxxxx>
  • Subject: RE: 2 Sky+ Boxes
  • From: "Keith Doxey" <ukha@xxxxxxx>
  • Date: Thu, 31 Jan 2002 13:01:15 -0000
  • Delivered-to: mailing list ukha_d@xxxxxxx
  • Mailing-list: list ukha_d@xxxxxxx; contact ukha_d-owner@xxxxxxx
  • Reply-to: ukha_d@xxxxxxx

You can use Homevision WITHOUT needing the expansion board
 
The IR signal is positive from the tip of the 3.5mm jack.
 
Use 2 of Port A's pins to ground the negative side of the IR LED's
 
Eg.
    Set Port A1 (digibox1) LOW
    Send IR
    Set Port A1 High
 
    Set Port A2 (digibox2) LOW
    Send IR
    Set Port A2 high
 
by setting both Low you can send commands to both.
 
Give it a try.
 
You will need VERY low power MiniEmitters (put a resistor in series) so the IR doesnt spread to the other box, trial and error by increasing the resistor value.
 
HTH
 
Keith
-----Original Message-----
From: Simon Coates [mailto:ecolume@xxxxxxx]
Sent: 31 January 2002 09:13
To: ukha_d@xxxxxxxSubject: [ukha_d] 2 Sky+ Boxes

Last week I ordered 2 Sky+ boxes, and they're due to be installed soon.  Since we don't have any terrestrial TV we need to be able to watch at least two separate channels, and with the Sky+ inbuilt Tivo player two favourites can both be recorded even when the schedules clash.  Great!
Anyway, I got thinking about controlling the 2 boxes as they will be next to each other in an AV rack.  I assumed that since the Sky+ system is designed to use 2 boxes then there would be a set-up screen, switch etc.. to have one box set to 'Sky box No.1' and the other to 'Sky box No.2' and the same IR remote to control the two separately/discreetly.  I've just got off the phone with Sky+ technical and they say that there isn't a way to control them as there aren't any discreet codes - so both boxes will respond to the IR remote at the same time :o(  Technical said that the number of people that would want 2 boxes next to each other is very low so they didn't bother with adding this feature! 
They said that I could use a standard digibox for the second box as it has different IR codes than to the Sky+ box.
 
I suppose I could use HomeVision's expansion card multi-zone IR to control 2 Sky+ boxes, but things start getting complex(ish)
 
Just thought I'd let you all know before someone else orders 2 Sky+ boxes.
 
Any other suggestions?
 
Simon
 
 


For more information: http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe:  ukha_d-subscribe@xxxxxxx
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
List owner:  ukha_d-owner@xxxxxxx

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

Yahoo! Groups Sponsor
ADVERTISEMENT
Click Here!

For more information: http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe:  ukha_d-subscribe@xxxxxxx
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
List owner:  ukha_d-owner@xxxxxxx

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

Home | Main Index | Thread Index

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.