The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: Re: Building Node0



Sorry - forgot

- "Network card for TiVo"

As an ACTUALLY IN USE

M.

-----Original Message-----
From: Mark Harrison
Sent: 27 December 2002 15:33
To: ukha_d@xxxxxxx Subject: RE: [ukha_d] Re: Building Node0


Andy, Laurence wrote:

> LOL!  I can't think what I'll need more CAT5 for though.

OK, here are some things that group members already use CAT5 for in
relation to telly/surround sound

- KAT5 in from "babycam"
- KAT5 out from rear channels of hi-fi to power amp at back of room (no
trailing speaker cable!)
- Ethernet into DDAR / Rio / Audiotron / Exstreamer
- IR Receiver for relay back to equipment in node zero
- IR Transmitter for control of hi-fi from HomeVision in node zero
- Phone with break out box, for routing incoming calls through the hi-fi
(hands free :-))

Here are some projects "on the workbench" - ie installed in a "not
permenent" manner with trailing leads

- 10BaseT into serial controller for xAP control of amp
- Via-based network DiVx player from central server

(Obviously, a lot depends on the availability of matrix switching. I
would move much more of the source system into node zero if I could, and
only have the power amps, speakers and TV in the room.)


Another rule of thumb worth remembering is that the number of uses for
KAT5 doubles every 2-3 years... That is to say that 5 years ago, we
could come up with 2 uses ACTUALLY IN USE on the list, 2 years ago we
could come up with 4, and now we can come up with 8.

The mantra worth remembering is that "cable is cheap, fittings are
expensive." As such, always run a quad run of cable to every box, even
if you only terminate 1 or 2 and leave the others behind blanking
plates. It's as easy to run a batch of 4 cables as it is to run a
single... but a real pig to run just one more 6 months down the line.

Regards,

Mark

http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe:  ukha_d-subscribe@xxxxxxx
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
List owner:  ukha_d-owner@xxxxxxx
List of UKHA Groups here -
http://groups.yahoo.com/group/UKHA_Grouplists/

Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/



________________________________________________________________________
This email has been scanned for all viruses by the MessageLabs SkyScan
service. For more information on a proactive anti-virus service working
around the clock, around the globe, visit http://www.messagelabs.com
________________________________________________________________________

________________________________________________________________________
This email has been scanned for all viruses by the MessageLabs SkyScan
service. For more information on a proactive anti-virus service working
around the clock, around the globe, visit http://www.messagelabs.com
________________________________________________________________________

http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe:  ukha_d-subscribe@xxxxxxx
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
List owner:  ukha_d-owner@xxxxxxx
List of UKHA Groups here - http://groups.yahoo.com/group/UKHA_Grouplists/


Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

Home | Main Index | Thread Index

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.