The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: OT Can't get there



OK, try this.

Do Start, Run, and then type in

    telnet 216.119.81.247 80

And bash enter.  A telnet window should appear, without any error
popup messages.  Then, into the telnet window type

    GET /

and bash enter, and you should be rewarded with screenfuls of
gobbledgook.  Telnet will then disconnect, popping up a dialog box. 
If so, then try again replacing the IP address with the site name. 
If that also works then ther is nothing wrong with your connection to
the site, or your ability to resolve names, and its a "local" problem.

If it works with address but not site, then its a DNS resolution
issue, but you've already pinged the site, so that side should be
OK.  If it is a DNS problem, open a command window, and do

    ipconfig /all more

and page your way through the resulting listing looking for DNS
servers, and then try to ping it/them.  If only one works, go to
control panel, and whizz out the non-working server as a temporary
measure 9eliminates MS TCP/IP confusion) and/or consult your ISP web
site to check they havent changed the IP addresses of their name
servers...

if theres a problem pinging them, ping the default gateway.

And treat the hostfile trick below as a temporary fix (if it works)
as  if you do it permanenrtly then you will have site docsonnectage
at some point in the future when autom8it.com changes its ISP or IP
address :-)))


David.


--- In ukha_d@xxxxxxx, "Alancc" <alan.cc@n...> wrote:
> He's getting pissed of with me now ;-)
>
> Tried that still the same.
>
> Alancc
> ----- Original Message -----
> From: Dan <dtoma@f...>
> To: <ukha_d@xxxxxxx>
> Sent: Sunday, December 15, 2002 7:43 PM
> Subject: Re: [ukha_d] OT Can't get there
>
>
> > Ok... last solution:
> > go and edit the following file on the server:
> > C:\WINNT\System32\Drivers\Etc\hosts
> >
> > Use Notepad to edit it, not Word.
> >
> > add the following line:
> >
> > 216.119.81.247        www.autom8it.com
> >
> > Save it and try again.
> >
> > Dan
> >   ----- Original Message -----
> >   From: Alancc
> >   To: ukha_d@xxxxxxx
> >   Sent: Sunday, December 15, 2002 9:37 PM
> >   Subject: Re: [ukha_d] OT Can't get there
> >
> >
> >   Tried that just the same, twaty thing is everything else is
fine and I
> >   haven't been fiddling.
> >
> >   Alancc
> >   ----- Original Message -----
> >   From: Tim Dawe <list.mailbox@n...>
> >   To: <ukha_d@xxxxxxx>
> >   Sent: Sunday, December 15, 2002 8:04 PM
> >   Subject: Re: [ukha_d] OT Can't get there
> >


http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe:  ukha_d-subscribe@xxxxxxx
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
List owner:  ukha_d-owner@xxxxxxx
List of UKHA Groups here - http://groups.yahoo.com/group/UKHA_Grouplists/


Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

Home | Main Index | Thread Index

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.