Color Kinetics PSU's & Stuff

["Rob Mouser" <rmouser@xxxxxxx>]

Hi All



One for all you electronics wizards! 

Thanks to some sterling work by Ian on his BB I will soon have enough
cove lights to start "The Hall" project. Which involves running
the
lights around the entire hallway area. A few questions though:



1)       Is it safe to run the DMX cable with
the power feeds to each
unit.

2)       I assume the DMX outputs of each
light can just daisy chain
together?

3)       Would I be able to purchase one or
two beefier PSU's to cut
down on my wiring. What spec would I need?

4)       Are there any limitations on cable
length at the 12v and DMX
end?

5)       Anyone got any bright ideas for a
wiring loom or 3core cable
that I could use. Small and flexible would be important criteria.



Then all I'll need is that DMX controller. Link it to c-bus and hey
presto!

Many thanks 



Rob Mouser

rmouser@xxxxxxx <mailto:rmouser@xxxxxxx> 

rob@xxxxxxx <mailto:rob@xxxxxxx> 







http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx 
Subscribe:  ukha_d-subscribe@xxxxxxx 
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx 
List owner:  ukha_d-owner@xxxxxxx
List of UKHA Groups here - http://groups.yahoo.com/group/UKHA_Grouplists/

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.