The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: Cheap Control Panels ?


  • To: <ukha_d@xxxxxxx>
  • Subject: RE: Cheap Control Panels ?
  • From: "Marcus Warrington" <marcusw@xxxxxxx>
  • Date: Thu, 1 Aug 2002 11:50:38 +0100
  • Mailing-list: list ukha_d@xxxxxxx; contact ukha_d-owner@xxxxxxx
  • Reply-to: ukha_d@xxxxxxx

One problem.. cost!

15 of those would cost me over =A35K.. that definitely wouldn't
get SWMBO approval !

I also wanted the touchscreen in each room to be a simple
display device, rather than a controller. I'd rather keep
things centralised in node0

Marcus

-----Original Message-----
   Date: Wed, 31 Jul 2002 22:40:09 +0100
   From: "Amar Nagi" <amar@xxxxxxx>
Subject: RE: Cheap Control Panels ?

Try the leopard touch screen

-----Original Message-----
From: Marcus Warrington [mailto:marcusw@xxxxxxx]
Sent: 31 July 2002 18:16
To: ukha_d@xxxxxxx Subject: [ukha_d] Cheap Control Panels ?

I've been searching around trying to find some epods or fuji's
to act as "control" panels in each room. The idea being that
instead of installing volume controls/light switches and any
number of other local control devices I could have one "soft"
panel in each room that could act as a programmable interface
to all HA and Audio stuff. Also means that because the control
is central (i.e. the panels are just display devices) I could
have better control .. for example if someone left the volume
turned up in a different room I can turn it down/off from the
room I'm currently in, or have the HA server turn off and reset
the volumne in every room at midnight etc. Anyway the point is
can I find any touch sensitive panels.. no.. well not a cheap
enough price anyway. (I've got a maximum of 13 rooms and two
hallways to do.. so the cheaper the better !) I saw in Dixon's
today that they are selling some PalmTop handheld organiser/pc
for =A399 each...since it has a touch sensitive screen and
(presumably) is programmable, I wondered if it would be possible
to stuff one into a case to mount in the wall and use a piece of
cat5 as a simple serial cable back to node0..

..anybody ever done anything like this before ? any comments ?



Yahoo! Groups Spons= or
ADVERTISEMENT

For more information: http://www= .automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe:  ukha_d-subscribe@xxxxxxx
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
List owner:  ukha_d-owner@xxxxxxx

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

Home | Main Index | Thread Index

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.