Umm… It is RJ45. It has 8 pins.
Quick photos - http://www.mysteric.com/philips.htm
I think I have my terminology
right?
Eric
-----Original
Message-----
From: Phil Harris
[mailto:phil@xxxxxxx]
Sent: 16 April 2002 19:32
To: ukha_d@xxxxxxx
Subject: RE: [ukha_d] Power
Adapter cord length extension
The
connector is an RJ11 ... not an RJ45.
You
should be able to get an RJ11 to RJ11 extension cable off the shelf from
any
phone shop...
-----Original Message-----
From: Eric de Oude
[mailto:eric.de.oude@xxxxxxx]
Sent: 16 April 2002 19:23
To: ukha_d@xxxxxxx
Subject: [ukha_d] Power
Adapter
cord length extension
Hi All – I wonder if you
can
offer some advice
I have a Phillips DECT phone.
The AC
adapter (I guess what you guys refer to as a wall wart??) has a standard
RJ45
connector at the end of the cable. The RJ45 connector plugs into the base
station to provide power.
I’d like to extend the
power
cable so that I can run it in some trunking and keep it tidy. Of the eight
pins
on the connector, only the outside four are wired. The middle four are not
wired.
The way I see it I can build
some
kind of extension keeping the original intact, or lob off the connector
(taking
note of the pin-outs) and connect some sort extension cable. I’ve
done
some CAT5 crimping and have the required crimping tools.
Any advice? Will the power run
over
std CAT5?
Thanks
Eric
For
more information: http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe: ukha_d-subscribe@xxxxxxx
Unsubscribe:
ukha_d-unsubscribe@xxxxxxx
List owner:
ukha_d-owner@xxxxxxx
Your use
of
Yahoo! Groups is subject to the Yahoo!
Terms of Service.
For more information: http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe: ukha_d-subscribe@xxxxxxx
Unsubscribe:
ukha_d-unsubscribe@xxxxxxx
List owner:
ukha_d-owner@xxxxxxx
Your use
of
Yahoo! Groups is subject to the Yahoo!
Terms of Service.