It is a truth universally acknowledged.....

["Mark Harrison" <Mark.Harrison@xxxxxxx>]

.... that it is impossible to install enough CAT5 cable.

My main hi-fi lives in the bedroom, so we can watch telly in bed...

When we were putting in CAT5, I thought "4 points will be
enough"... and for the moment, they are, but I'm now using 3 of
them:

1: Into the ethernet port on the DDAR
2: Taking the rear channel out from the processor and sending it (using a
KAT5 TX) to the rear amp and speakers at the other side of the room
3: Taking the "babycam" feed into a KAT5 RX.

.... now, if I add, as the "master plan" currently has:

1: A "mark2" ViaProject box, for DiVx playback
2: A feed from the (proposed) gardencam
3: A feed from the (proposed) frontdoorcam
4: A feed from "mr PC" to display "Outlook today" as
part of the "good morning Mark" routine

that will take me to 6 ;-(

Looks like I'm going to either have to install more, or use the KAT5
switcher to switch the incoming feeds (and locate that back in the patch
cupboard.)

Ho hum... the struggle continues ;-)

Regards,

Mark

Yahoo! Groups Sponsor

ADVERTISEMENT

For more information: http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx 
Subscribe:  ukha_d-subscribe@xxxxxxx 
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx 
List owner:  ukha_d-owner@xxxxxxx

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.