|
The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024
|
|
[Date Prev][Date
Next][Thread Prev][Thread Next][Date
Index][Thread Index]
Re: OT VIA freezing
what should the memory be set
too.
i have 512mb
----- Original Message -----
Sent: Wednesday, April 10, 2002 2:40
PM
Subject: RE: [ukha_d] OT VIA
freezing
Yup, watch for the speed setting for RAM as well, it has
to
be right if you are playing 3D games as I found out the hard way trying
to
run Medal Of Honour at first, Renegade was more stable on XP...just! It
still freezes with various things causing the error, one is a driver
error
for VGA, memory MS gobbledigook and some weird TCP/IP error. That's
me running a gig of DDR with an Athlon 1700+ on an Asus mobo with GE
Force3 Golden Sample Chaintech card in the PC.
Some of the newer
games seem _not_ to take too kindly to a little overclocking
IME.
When it runs it's really good though ;-)
K.
>
-----Original Message----- > From: Des Gibbons
[mailto:des@xxxxxxx] > Sent: 10 April 2002 13:16 > To:
ukha_d@xxxxxxx> Subject: RE: [ukha_d] OT VIA freezing >
> Aperature size should be half ram size, although I think 64
pretty much > works :) > > I find most freezing probs
are either heat or acpi related. > > As far as XP goes, you
will
need to set your PC-type as a non-acpi one, do > a > web
search
and you should find some useful info, it has been a while :) >
> Des > -----Original Message----- > From: Aashram
[mailto:amar@xxxxxxx] > Sent: Thursday, April 11, 2002 00:07 >
To: ukha_d@xxxxxxx> Subject: Re: [ukha_d] OT VIA
freezing > > > Thanks des i will check the
temperature, > > when i disable acpi though WinXP does not
start. > > In the bios i have agp settings, > I have
master
1 read enabled and master 1 write enabled > > is that ok
? also the aperture size is 64 ? > > > >
> ----- Original Message ----- > From: Des Gibbons > To:
ukha_d@xxxxxxx> Sent: Wednesday, April 10, 2002 12:52
PM > Subject: RE: [ukha_d] OT VIA freezing > > >
First off check that your PC isn't overheating, expect a 20 degree jump
in > cpu temp when playing hard. Play for 5 mins, then check your cpu
temp. > > If cpu temp is fine, disable acpi. > >
Cheers, Des. > -----Original Message----- > From: Aashram
[mailto:amar@xxxxxxx] > Sent: Wednesday, April 10, 2002
23:51 > To: ukha_d@xxxxxxx> Subject: [ukha_d] OT VIA
freezing > > > I have a gforce 3 card and a biotstar
mothboard > and 1ghz athlon tbird. I have put XP on the
machine >
and want to use the machine for games. > > When i play any 3d
game after a while the comp;uter freezes. Andi have to > hard
reset
the pc. > > I have tried pretty much everything. I have
switched
off > the IRQ sharing, updated drivers, latest 4in1 via
drivers. > > Anyone help on this ? > > >
Home |
Main Index |
Thread Index
|
|
Comments to the Webmaster are always welcomed, please use
this contact form
. Note that as this site is a mailing list archive, the Webmaster has no control
over the contents of the messages. Comments about message content should be directed
to the relevant mailing list.
|