The UK Home Automation Archive

Archive Home

Group Home

Search Archive
Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024

Latest message you have seen: Re: Recording phone line

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Socket 7 motherboard

To: <ukha_d@xxxxxxx>
Subject: Re: Socket 7 motherboard
From: "Ian Lowe" <ian@xxxxxxx>
Date: Sun, 2 Sep 2001 11:21:02 +0100
Delivered-to: rich@xxxxxxx
Delivered-to: mailing list ukha_d@xxxxxxx
Mailing-list: list ukha_d@xxxxxxx; contact ukha_d-owner@xxxxxxx
References: <004201c1338e$ba120400$0100a8c0@xxxxxxx>
Reply-to: ukha_d@xxxxxxx

You are in luck (well, sort of)

I have a Socket 7 board, with integrated IDE/bits. none of the cables are
here (but they are all standard fare for these boards) It has 16Mb worth of
DIMMS, and a Cyrix 6x86 120Mhz Processor, which I will leave on (mostly
because I just booted it with that combo)

The "sort of" component comes in the fact that I don't have the
manual for
this beast, and therefore setting the jumpers might be
"educational"

You can have it for the postage. :)

Ian.

References:
- Socket 7 motherboard
  - From: "Robin Edwards" <robin@xxxxxxx>

Prev by Date: Re: Socket 7 motherboard
Next by Date: RE: Socket 7 motherboard
Previous by thread: Re: Socket 7 motherboard
Next by thread: Re: Socket 7 motherboard
Index(es):
- Date
- Thread

Home | Main Index | Thread Index

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.