[Date Prev][Date
Next][Thread Prev][Thread Next][Date
Index][Thread Index]
Re: Re: Meteor
So if my caller display does not operate and NTL say the service is enabled
where do I go from here, how can I check to see if the service is on?
Alancc
----- Original Message -----
From: Stuart Whyte <stuart@xxxxxxx>
To: <ukha_d@xxxxxxx>
Sent: Saturday, October 20, 2001 7:29 PM
Subject: [ukha_d] Re: Meteor
Alan,
I was told by Telewest customer services that only a selected few CID
units work on their lines and when asked about the meteor I
got "There's no chance it will work, cause it aint on the list"
so
even though NTL SAY it won work doesnt mean it wont!! AFAIK NTL and
Telewest use the same standard, although I could be wrong.
S.
--- In ukha_d@y..., "Alancc" <alan.cc@n...> wrote:
> RE: [ukha_d] Re: MeteorNot all CID units work with NTL so they say,
my nice BT one doesn't and they reckon I am switched on, NTL say its
not compatible and sent me a list of ones that are.
> I want to use Meteor with NTL so will be interested on how you get
on.
> Best of luck with phoning NTL, hope your not in a hurry.
>
> Alancc
> ----- Original Message -----
> From: Brian G. Reynolds
> To: ukha_d@y...
> Sent: Saturday, October 20, 2001 5:56 PM
> Subject: RE: [ukha_d] Re: Meteor
>
>
> yes I think I am inclined to agree with you at this stage, I have
been out for a while so I shall soon ring NTL and find out what is
going on.
>
> I asked my Brother In Law if he had a spare CID unit but he has
not, suppose while I was out.......
>
> Thanks,
>
> B.
> -----Original Message-----
> From: John Hill [mailto:jhill1@xxxxxxx...]
> Sent: 20 October 2001 17:46
> To: ukha_d@y...
> Subject: RE: [ukha_d] Re: Meteor
>
>
> Brian,
> The Meteor is not seeing any CID info, most likely 'cause your
not getting CID on your line, have you got any other caller display
device you can plug in?
>
> I found all this when I first got my Meteor and bought a cheapy
display from Argos (~£10) which works on all CID formats.
>
> I found the Meteor worked very reliably, It was BT that wasn't
always sending the info...
>
> John
>
>
>
> -----Original Message-----
> From: Brian G. Reynolds [mailto:brian.g.reynolds@xxxxxxx...]
> Sent: 20 October 2001 12:36
> To: ukha_d
> Subject: RE: [ukha_d] Re: Meteor
>
>
>
> Aha, I'm getting somewhere! I have changed the baud to 1200 and
now when I
> dial out it displays on-line and then displays the numbers! but
when I dial
> in all that is displayed is off-line.
>
> So half of it is working!
>
> Any further ideas?
>
> Going out soon to move a Macaw cage!! joys of having a van! so
if I am slow
> replying that is why.
>
> Thanks guys,
>
> B.
>
> > -----Original Message-----
> > From: Stuart Whyte [mailto:stuart@xxxxxxx...]
> > Sent: 20 October 2001 09:48
> > To: ukha_d@y...
> > Subject: [ukha_d] Re: Meteor
> >
> >
> > Brain,
> >
> > The garbage would indicat an incorrect baud rate. Have
rechecked the
> > manual, the correct baud is 1200, not 2400. Once this is
changed,
> > pick up your phone handset, and "ONLINE" should
appear on the
> > screen. When you dial the numbers should also appear on the
screen.
> >
> > HTH
> >
> > Stuart
> >
> > --- In ukha_d@y..., "Brian G. Reynolds"
<brian.g.reynolds@n...> wrote:
> > > Good theory, I have set HyperTerminal to port1 but still
nothing
> > appears.
> > >
> > > If I dial out I get garbage on the screen so I suppose
that
says
> > something
> > > but when I dial in from my mobile sod all, the green led
flashes as
> > does the
> > > red led but no characters.
> > >
> > > B.
> > >
> > > > -----Original Message-----
> > > > From: ian@g... [mailto:ian@xxxxxxx...]
> > > > Sent: 19 October 2001 23:11
> > > > To: ukha_d@y...
> > > > Subject: [ukha_d] Re: Meteor
> > > >
> > > >
> > > > Hi
> > > > No, if hyperterm will not connect to a port it
means some
other
> > > > software is using it or it is not a valid port. You
are
allowed to
> > > > have things connected to the port and start
hyperterminal.
> > > >
> > > > Try to disable any software using comm1 then try
again
and you
> > should
> > > > see what ever data is coming in on the selected
comm
port.
> > > >
> > > > Ian D
> > > >
> > > > --- In ukha_d@y..., "Brian G. Reynolds"
<brian.g.reynolds@n...>
> > wrote:
> > > > > I try to open term and it will not connect to
comm.1 as
the
> > Meteor
> > > > is using
> > > > > it, makes sense, so I close Meteor and the
lights go
off but
> > > > hyperterm
> > > > > starts, also makes sense.
> > > > >
> > > > > Then the Meteor has the red LED on and when I
dial
nothing
> > shows on
> > > > the term
> > > > > but the LED's flash as expected.
> > > > >
> > > > > Do I not have to type something in term to get
it
to "echo" to
> > the
> > > > screen?
> > > > >
> > > > > BTW as I dial out that is shown on the Meteor
software.
> > > > >
> > > > > B.
> > > > >
> > > > > > -----Original Message-----
> > > > > > From: Stuart Whyte [mailto:stuart@xxxxxxx...]
> > > > > > Sent: 19 October 2001 21:49
> > > > > > To: ukha_d@y...
> > > > > > Subject: [ukha_d] Re: Meteor
> > > > > >
> > > > > >
> > > > > > Brain,
> > > > > >
> > > > > > First off is to check that the Baud rate
is right;
2400 (see
> > > > Patricks
> > > > > > post)
> > > > > >
> > > > > > When the GREEN light flashes, data should
be seen on
the
> > screen in
> > > > > > plain text.
> > > > > >
> > > > > > HTH
> > > > > >
> > > > > > S.
> > > > > >
> > > > > >
> > > > > >
> > > > > > For more information: http://www.automatedhome.co.uk
> > > > > > Post message: ukha_d@y...
> > > > > > Subscribe: ukha_d-subscribe@y...
> > > > > > Unsubscribe: ukha_d-unsubscribe@y...
> > > > > > List owner: ukha_d-owner@y...
> > > > > >
> > > > > > Your use of Yahoo! Groups is subject to
> > > > http://docs.yahoo.com/info/terms/
> > > > > >
> > > > > >
> > > > > >
> > > >
> > > >
> > > >
> > > > For more information: http://www.automatedhome.co.uk
> > > > Post message: ukha_d@y...
> > > > Subscribe: ukha_d-subscribe@y...
> > > > Unsubscribe: ukha_d-unsubscribe@y...
> > > > List owner: ukha_d-owner@y...
> > > >
> > > > Your use of Yahoo! Groups is subject to
> > http://docs.yahoo.com/info/terms/
> > > >
> > > >
> > > >
> >
> >
> >
> > For more information: http://www.automatedhome.co.uk
> > Post message: ukha_d@y...
> > Subscribe: ukha_d-subscribe@y...
> > Unsubscribe: ukha_d-unsubscribe@y...
> > List owner: ukha_d-owner@y...
> >
> > Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
> >
> >
> >
>
>
>
> ------------------------ Yahoo! Groups Sponsor -----------------
----~-->
> FREE COLLEGE MONEY
> CLICK HERE to search
> 600,000 scholarships!
> http://us.click.yahoo.com/Pv4pGD/4m7CAA/ySSFAA/IBOolB/TM
> ----------------------------------------------------------------
-----~->
>
> For more information: http://www.automatedhome.co.uk
> Post message: ukha_d@y...
> Subscribe: ukha_d-subscribe@y...
> Unsubscribe: ukha_d-unsubscribe@y...
> List owner: ukha_d-owner@y...
>
> Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
>
>
>
>
> For more information: http://www.automatedhome.co.uk
> Post message: ukha_d@y...
> Subscribe: ukha_d-subscribe@y...
> Unsubscribe: ukha_d-unsubscribe@y...
> List owner: ukha_d-owner@y...
>
> Your use of Yahoo! Groups is subject to the Yahoo! Terms of
Service.
>
>
> Yahoo! Groups Sponsor
> ADVERTISEMENT
>
>
>
>
> For more information: http://www.automatedhome.co.uk
> Post message: ukha_d@y...
> Subscribe: ukha_d-subscribe@y...
> Unsubscribe: ukha_d-unsubscribe@y...
> List owner: ukha_d-owner@y...
>
> Your use of Yahoo! Groups is subject to the Yahoo! Terms of
Service.
For more information: http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe: ukha_d-subscribe@xxxxxxx
Unsubscribe: ukha_d-unsubscribe@xxxxxxx
List owner: ukha_d-owner@xxxxxxx
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
Home |
Main Index |
Thread Index
|