Re: Microbore Central Heating...

["Alancc" <alan.cc@xxxxxxx>]

Sounds about right.

Alancc
----- Original Message -----
From: Phil Harris <phillip.harris1@xxxxxxx>
To: <ukha_d@xxxxxxx>
Sent: Friday, October 19, 2001 9:36 AM
Subject: [ukha_d] Microbore Central Heating...


>
> I was diging around under floorboards yesterday trying to find where
they'd
> run heating pipes and cables etc. and I came across the main
"meeting
point"
> for the microbore piping for our heating system.
>
> The "junction" is a short length of straight pipe with
twelve outlets
simply
> bridged across the flow and return pipes from the boiler ... does
anyone
> know whether that short length is blocked internally and therefore the
first
> six outlets are "flow"s and the second six are
"return"s? I assume they
must
> be as the second half of the junction takes ages to get hot whereas
the
> first half heats up immediately. Also if it were just straight through
then
> the radiators wouldn't get a flow as the hot water would simply go
straight
> through.
>
> Are my assumptions correct here?
>
> Phil
>
>
> For more information: http://www.automatedhome.co.uk
> Post message: ukha_d@xxxxxxx
> Subscribe:  ukha_d-subscribe@xxxxxxx
> Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
> List owner:  ukha_d-owner@xxxxxxx
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>