The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: AM12U Appliance Module


  • To: <ukha_d@xxxxxxx>
  • Subject: RE: AM12U Appliance Module
  • From: "Brian G. Reynolds" <brian.g.reynolds@xxxxxxx>
  • Date: Fri, 12 Oct 2001 17:42:36 +0100
  • Delivered-to: mailing list ukha_d@xxxxxxx
  • Mailing-list: list ukha_d@xxxxxxx; contact ukha_d-owner@xxxxxxx
  • Reply-to: ukha_d@xxxxxxx

Yes I originally cut something with 3 legs but as you said that was not it so I soldered it again.
 
I then found a black thing tucked away with a wire coming out each end so I cut the one I could reach but still no joy.
 
I will look at the site you mentioned.
 
Sorry to be a pain.
 
Thanks,
 
B.
-----Original Message-----
From: steve [mailto:steve@xxxxxxx]
Sent: 12 October 2001 17:03
To: ukha_d@xxxxxxxSubject: Re: [ukha_d] AM12U Appliance Module

If you have cut something with three leads then that is not the diode.
 
 
The layout of makes varies but they are generally simililar.
 
----- Original Message -----
Sent: Friday, October 12, 2001 4:47 PM
Subject: RE: [ukha_d] AM12U Appliance Module

Well I have found the only item as you describe near a big blue rectangular thing and have cut it, now the LED is still on but cannot switch the AP on/off at all.
 
Am I missing something?
 
B.
-----Original Message-----
From: steve [mailto:steve@xxxxxxx]
Sent: 12 October 2001 16:24
To: ukha_d@xxxxxxx
Subject: Re: [ukha_d] AM12U Appliance Module

No. The diode only has 2 ends
----- Original Message -----
Sent: Friday, October 12, 2001 4:02 PM
Subject: RE: [ukha_d] AM12U Appliance Module

Sorry to send this again but I cut one leg off and the whole thing stopped working! me thinks I cocked up!
 
The thing I cu one leg from had 3 legs, do not know what it is, I have soldered it ant all seems well but LED still on.
 
Any other suggestions anyone?
 
B.
-----Original Message-----
From: Brian G. Reynolds [mailto:brian.g.reynolds@xxxxxxx]
Sent: 07 October 2001 00:14
To: ukha_d@xxxxxxxSubject: RE: [ukha_d] AM12U Appliance Module

Hi Steve,
There are two blue round flat things one of which has VG7K or maybe VO7K written on it and has Fuse written on the PCB.
There is also a Blue(ish) box with OKAYA PA224 0.22yF  K written on it, I assume this is some sort of capacitor.
 
On the other end of the PCB there is another blue round flat thing with a white wire near it going to the coil.
There is a small black "D" shape item with 3 legs (similar in shape to the DS1820 temperature sensors) near with MCR 100-B written on it I cannot see a silver band on the end though.
 
Sorry but I am still not sure what item to cut, any suggestions?
 
Thanks again.
 
B.
-----Original Message-----
From: steve [mailto:steve@xxxxxxx]
Sent: 06 October 2001 21:35
To: ukha_d@xxxxxxxSubject: RE: [ukha_d] AM12U Appliance Module

Brian,
 
Usually there will be two capacitors, these are usually blue or orange. Next to the small one there will be a diode, this is a black component with a silver band at one end. Simply snip the lead at one end of the diode. Also likely to be near to the flying lead to the relay.
 
HTH
 
Steve.
 
-------Original Message-------
 
Date: Sunday, October 07, 2001 00:57:11
Subject: RE: [ukha_d] AM12U Appliance Module
 
Sorry Brian,

Havent got one I can take to bits at the moment :-(

Keith

> -----Original Message-----
> From: Brian G. Reynolds [mailto:brian.g.reynolds@xxxxxxx]
> Sent: 06 October 2001 18:59
> To: ukha_d@xxxxxxx> Subject: RE: [ukha_d] AM12U Appliance Module
>
>
> Err, great Keith, just taken the top off and apart from a large
> headed screw
> floating around inside I aint got a clue what to remove?
>
> The parts are labelled on the circuit but not on the diagram, or
> am I being
> stupid?
>
> Can you possibly point me in the right direction please.
>
> Thanks,
>
> B.
>
> > -----Original Message-----
> > From: Keith Doxey [mailto:ukha@xxxxxxx]
> > Sent: 06 October 2001 16:25
> > To: ukha_d@xxxxxxx> > Subject: RE: [ukha_d] AM12U Appliance Module
> >
> >
> > There is a 2K2 resistor for current sense which forms part of the local
> > control circuitry (top right on diagram). If there is a very low
> > load on the
> > module there may well be enough current to keep it partially powered.
> >
> > Keith
> >
> > > -----Original Message-----
> > > From: Phil Harris [mailto:phillip.harris1@xxxxxxx]
> > > Sent: 06 October 2001 16:20
> > > To: ukha_d@xxxxxxx> > > Subject: RE: [ukha_d] AM12U Appliance Module
> > >
> > >
> > > There shouldn't be current "seepage" with an appliance module as
> > > there is a
> > > rudy great relay in there doing the switching and there shouldn't be
> > > anything seeping through that.
> > >
> > > Do you actually hear the appliance module clunk off? Can you
> measure the
> > > voltage at the input to the switcher?
> > >
> > > Phil
> > >
> > > > -----Original Message-----
> > > > From: Brian G. Reynolds [mailto:brian.g.reynolds@xxxxxxx]
> > > > Sent: 06 October 2001 15:41
> > > > To: ukha_d@xxxxxxx> > > > Subject: RE: [ukha_d] AM12U Appliance Module
> > > >
> > > >
> > > > No the transformer does not cause it to switch back on the
> > only reason I
> > > > know it is still on is the "On" LED goes dim but not off
> > which is why I
> > > > thought current seeping through.
> > > >
> > > > B.
> > > >
> > > > > -----Original Message-----
> > > > > From: Phil Harris [mailto:phillip.harris1@xxxxxxx]
> > > > > Sent: 06 October 2001 14:59
> > > > > To: ukha_d@xxxxxxx> > > > > Subject: RE: [ukha_d] AM12U Appliance Module
> > > > >
> > > > >
> > > > > Does the transformer turn off and then turn back on again
> > after a few
> > > > > seconds when you send the X10 off command?
> > > > >
> > > > > Phil
> > > > >
> > > > > > -----Original Message-----
> > > > > > From: Brian G. Reynolds [mailto:brian.g.reynolds@xxxxxxx]
> > > > > > Sent: 06 October 2001 14:24
> > > > > > To: UKHA Group
> > > > > > Subject: [ukha_d] AM12U Appliance Module
> > > > > >
> > > > > >
> > > > > > Guys I am sure this has been mentioned before so sorry if it has
> > > > > > but I have
> > > > > > at last finished my rack-mounted CCTV switcher but I have a
> > > > > > slight problem.
> > > > > >
> > > > > > I have plugged the switcher transformer which supplies the
> > > > power to the
> > > > > > switcher and the CCTV cameras into an Appliance Module AM12U
> > > > but when I
> > > > > > switch the AM12U off the "on" LED on my switcher stays on, I
> > > > > have heard of
> > > > > > this before as their is a current draw(?) I think I have to cut
> > > > > something?
> > > > > >
> > > > > > Can someone please advise me as to what to do please.
> > > > > >
> > > > > > Also thanks Keith for the wiring advise re LED's, fuses and
> > > > > resistors lots
> > > > > > back.
> > > > > >
> > > > > > TIA.
> > > > > >
> > > > > > B.
> > > > > >
> > > > > >
> > > > > >
> > > > > > For more information: http://www.automatedhome.co.uk
> > > > > > Post message: ukha_d@xxxxxxx> > > > > > Subscribe:  ukha_d-subscribe@xxxxxxx> > > > > > Unsubscribe:  ukha_d-unsubscribe@xxxxxxx> > > > > > List owner:  ukha_d-owner@xxxxxxx> > > > > >
> > > > > > Your use of Yahoo! Groups is subject to
> > > > http://docs.yahoo.com/info/terms/
> > > > >
> > > > >
> > > >
> > > >
> > > >
> > > > For more information: http://www.automatedhome.co.uk
> > > > Post message: ukha_d@xxxxxxx> > > > Subscribe:  ukha_d-subscribe@xxxxxxx> > > > Unsubscribe:  ukha_d-unsubscribe@xxxxxxx> > > > List owner:  ukha_d-owner@xxxxxxx> > > >
> > > > Your use of Yahoo! Groups is subject to
> > > http://docs.yahoo.com/info/terms/
> > > >
> > > >
> > > >
> > > >
> > > >
> > > > For more information: http://www.automatedhome.co.uk
> > > > Post message: ukha_d@xxxxxxx> > > > Subscribe:  ukha_d-subscribe@xxxxxxx> > > > Unsubscribe:  ukha_d-unsubscribe@xxxxxxx> > > > List owner:  ukha_d-owner@xxxxxxx> > > >
> > > > Your use of Yahoo! Groups is subject to
> > > http://docs.yahoo.com/info/terms/
> > > >
> > > >
> > >
> > >
> > >
> > > For more information: http://www.automatedhome.co.uk
> > > Post message: ukha_d@xxxxxxx> > > Subscribe:  ukha_d-subscribe@xxxxxxx> > > Unsubscribe:  ukha_d-unsubscribe@xxxxxxx> > > List owner:  ukha_d-owner@xxxxxxx> > >
> > > Your use of Yahoo! Groups is subject to
> http://docs.yahoo.com/info/terms/
> >
> >
> >
>
>
> For more information: http://www.automatedhome.co.uk
> Post message: ukha_d@xxxxxxx> Subscribe:  ukha_d-subscribe@xxxxxxx> Unsubscribe:  ukha_d-unsubscribe@xxxxxxx> List owner:  ukha_d-owner@xxxxxxx>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>
>
> For more information: http://www.automatedhome.co.uk
> Post message: ukha_d@xxxxxxx> Subscribe:  ukha_d-subscribe@xxxxxxx> Unsubscribe:  ukha_d-unsubscribe@xxxxxxx> List owner:  ukha_d-owner@xxxxxxx>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>



For more information: http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe:  ukha_d-subscribe@xxxxxxx
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
List owner:  ukha_d-owner@xxxxxxx

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
 
_________________________________________________
IncrediMail - Email has finally evolved - Click Here


For more information: http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe:  ukha_d-subscribe@xxxxxxx
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
List owner:  ukha_d-owner@xxxxxxx

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.


For more information: http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe:  ukha_d-subscribe@xxxxxxx
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
List owner:  ukha_d-owner@xxxxxxx

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

For more information: http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe:  ukha_d-subscribe@xxxxxxx
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
List owner:  ukha_d-owner@xxxxxxx

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.


For more information: http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe:  ukha_d-subscribe@xxxxxxx
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
List owner:  ukha_d-owner@xxxxxxx

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.


For more information: http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe:  ukha_d-subscribe@xxxxxxx
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
List owner:  ukha_d-owner@xxxxxxx

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.


For more information: http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe:  ukha_d-subscribe@xxxxxxx
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
List owner:  ukha_d-owner@xxxxxxx

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

Yahoo! Groups Sponsor
ADVERTISEMENT
<a href="http://rd.yahoo.com/M=168643.1620686.3205344.1261774/D=egroupweb/S=1705041992:HM/A=816903/R=1/*http://www.overstock.com/cgi-bin/d2.cgi?cid=12973" target="_blank"> <img src="javascript:void(0);" width=300 height=250 border=0></a>

For more information: http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe:  ukha_d-subscribe@xxxxxxx
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
List owner:  ukha_d-owner@xxxxxxx

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

Home | Main Index | Thread Index

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.