RE: AM12U Appliance Module

["Brian G. Reynolds" <brian.g.reynolds@xxxxxxx>]

Is it safe? I presume it was fitted there for a reason?
not for amateurs like me to remove it!

Thanks,

B.

> -----Original Message-----
> From: Keith Doxey [mailto:ukha@xxxxxxx]
> Sent: 06 October 2001 16:43
> To: ukha_d@xxxxxxx
> Subject: RE: [ukha_d] AM12U Appliance Module
>
>
> The note [3] says to remove the diode below the resistor to
> disable current
> sense. As that would remove the path via which the current is flowing
it
> should go off completely.
>
> Keith
>
> > -----Original Message-----
> > From: Brian G. Reynolds [mailto:brian.g.reynolds@xxxxxxx]
> > Sent: 06 October 2001 16:35
> > To: ukha_d@xxxxxxx
> > Subject: RE: [ukha_d] AM12U Appliance Module
> >
> >
> > That's the picture I remember, Thanks Keith.
> >
> > Is this a problem, apart from the cosmetics issue of showing on
when
> > actually off?
> >
> > Could I fit a larger resistor on this LED to hide it although it
> > still will
> > have power, or can/should I cut the 2K2 resistor somewhere?
> >
> > B. out of his depth again but learning...
> >
> > > -----Original Message-----
> > > From: Keith Doxey [mailto:ukha@xxxxxxx]
> > > Sent: 06 October 2001 16:25
> > > To: ukha_d@xxxxxxx
> > > Subject: RE: [ukha_d] AM12U Appliance Module
> > >
> > >
> > > There is a 2K2 resistor for current sense which forms part
of
> the local
> > > control circuitry (top right on diagram). If there is a very
low
> > > load on the
> > > module there may well be enough current to keep it partially
powered.
> > >
> > > Keith
> > >
> > > > -----Original Message-----
> > > > From: Phil Harris [mailto:phillip.harris1@xxxxxxx]
> > > > Sent: 06 October 2001 16:20
> > > > To: ukha_d@xxxxxxx
> > > > Subject: RE: [ukha_d] AM12U Appliance Module
> > > >
> > > >
> > > > There shouldn't be current "seepage" with an
appliance module as
> > > > there is a
> > > > rudy great relay in there doing the switching and there
shouldn't be
> > > > anything seeping through that.
> > > >
> > > > Do you actually hear the appliance module clunk off?
Can you
> > measure the
> > > > voltage at the input to the switcher?
> > > >
> > > > Phil
> > > >
> > > > > -----Original Message-----
> > > > > From: Brian G. Reynolds [mailto:brian.g.reynolds@xxxxxxx]
> > > > > Sent: 06 October 2001 15:41
> > > > > To: ukha_d@xxxxxxx
> > > > > Subject: RE: [ukha_d] AM12U Appliance Module
> > > > >
> > > > >
> > > > > No the transformer does not cause it to switch
back on the
> > > only reason I
> > > > > know it is still on is the "On" LED goes
dim but not off
> > > which is why I
> > > > > thought current seeping through.
> > > > >
> > > > > B.
> > > > >
> > > > > > -----Original Message-----
> > > > > > From: Phil Harris [mailto:phillip.harris1@xxxxxxx]
> > > > > > Sent: 06 October 2001 14:59
> > > > > > To: ukha_d@xxxxxxx
> > > > > > Subject: RE: [ukha_d] AM12U Appliance Module
> > > > > >
> > > > > >
> > > > > > Does the transformer turn off and then turn
back on again
> > > after a few
> > > > > > seconds when you send the X10 off command?
> > > > > >
> > > > > > Phil
> > > > > >
> > > > > > > -----Original Message-----
> > > > > > > From: Brian G. Reynolds [mailto:brian.g.reynolds@xxxxxxx]
> > > > > > > Sent: 06 October 2001 14:24
> > > > > > > To: UKHA Group
> > > > > > > Subject: [ukha_d] AM12U Appliance Module
> > > > > > >
> > > > > > >
> > > > > > > Guys I am sure this has been mentioned
before so
> sorry if it has
> > > > > > > but I have
> > > > > > > at last finished my rack-mounted CCTV
switcher but I have a
> > > > > > > slight problem.
> > > > > > >
> > > > > > > I have plugged the switcher transformer
which supplies the
> > > > > power to the
> > > > > > > switcher and the CCTV cameras into an
Appliance Module AM12U
> > > > > but when I
> > > > > > > switch the AM12U off the "on"
LED on my switcher stays on, I
> > > > > > have heard of
> > > > > > > this before as their is a current
draw(?) I think I
> have to cut
> > > > > > something?
> > > > > > >
> > > > > > > Can someone please advise me as to what
to do please.
> > > > > > >
> > > > > > > Also thanks Keith for the wiring advise
re LED's, fuses and
> > > > > > resistors lots
> > > > > > > back.
> > > > > > >
> > > > > > > TIA.
> > > > > > >
> > > > > > > B.
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > > For more information: http://www.automatedhome.co.uk
> > > > > > > Post message: ukha_d@xxxxxxx
> > > > > > > Subscribe:  ukha_d-subscribe@xxxxxxx
> > > > > > > Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
> > > > > > > List owner:  ukha_d-owner@xxxxxxx
> > > > > > >
> > > > > > > Your use of Yahoo! Groups is subject to
> > > > > http://docs.yahoo.com/info/terms/
> > > > > >
> > > > > >
> > > > >
> > > > >
> > > > >
> > > > > For more information: http://www.automatedhome.co.uk
> > > > > Post message: ukha_d@xxxxxxx
> > > > > Subscribe:  ukha_d-subscribe@xxxxxxx
> > > > > Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
> > > > > List owner:  ukha_d-owner@xxxxxxx
> > > > >
> > > > > Your use of Yahoo! Groups is subject to
> > > > http://docs.yahoo.com/info/terms/
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > > For more information: http://www.automatedhome.co.uk
> > > > > Post message: ukha_d@xxxxxxx
> > > > > Subscribe:  ukha_d-subscribe@xxxxxxx
> > > > > Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
> > > > > List owner:  ukha_d-owner@xxxxxxx
> > > > >
> > > > > Your use of Yahoo! Groups is subject to
> > > > http://docs.yahoo.com/info/terms/
> > > > >
> > > > >
> > > >
> > > >
> > > >
> > > > For more information: http://www.automatedhome.co.uk
> > > > Post message: ukha_d@xxxxxxx
> > > > Subscribe:  ukha_d-subscribe@xxxxxxx
> > > > Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
> > > > List owner:  ukha_d-owner@xxxxxxx
> > > >
> > > > Your use of Yahoo! Groups is subject to
> > http://docs.yahoo.com/info/terms/
> > >
> > >
> > >
> >
> >
> > For more information: http://www.automatedhome.co.uk
> > Post message: ukha_d@xxxxxxx
> > Subscribe:  ukha_d-subscribe@xxxxxxx
> > Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
> > List owner:  ukha_d-owner@xxxxxxx
> >
> > Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
>
>
>
>
> For more information: http://www.automatedhome.co.uk
> Post message: ukha_d@xxxxxxx
> Subscribe:  ukha_d-subscribe@xxxxxxx
> Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
> List owner:  ukha_d-owner@xxxxxxx
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>



For more information: http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe:  ukha_d-subscribe@xxxxxxx
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
List owner:  ukha_d-owner@xxxxxxx

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/