The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: IR Blasters


  • To: <ukha_d@xxxxxxx>
  • Subject: RE: IR Blasters
  • From: "Kenneth Watt" <kennethwatt@xxxxxxx>
  • Date: Mon, 14 May 2001 18:37:47 +0100
  • Delivered-to: rich@xxxxxxx
  • Delivered-to: mailing list ukha_d@xxxxxxx
  • Mailing-list: list ukha_d@xxxxxxx; contact ukha_d-owner@xxxxxxx
  • Reply-to: ukha_d@xxxxxxx

Mmmm....food for thought there - and a project or two!

Never thought about the feedback loop one though, I see your point. As for
putting IR emitters inside an appliance, well that's one I never thought of
before now :o)

Thanks Keith

K

-----Original Message-----
From: 	Keith Doxey [mailto:ukha.diyha@xxxxxxx]
Sent:	13 May 2001 21:31
To:	ukha_d@xxxxxxx
Subject:	RE: [ukha_d] IR Blasters

If you have any form of Multi room IR repeater in use, there is a danger
when using blasters that the signal will be picked up by a reciever and a
feedback loop created which will lock up the system.

Also with a blaster the signal can bounce off many surfaces and arrive at
slighty different times on each path thereby confusing the equipment.

Hi-Power IR LED's are available for about 70p from M***** ( or they were
last time I bought some). The secret to blasting IR is very high pulses of
current through the LED's using multiple IR LED's in series.

My prefered method is Individual emitters. Much more reliable and
controllable. If you follow the IR tutorial on my website you can build
your
own. You dont need to stick them on the front, if you are careful you CAN
mount them inside the equipment as long as you observe electrical safety
and
moving parts......BUT AT YOUR OWN RISK !

Keith

> -----Original Message-----
> From: Kenneth Watt [mailto:kennethwatt@xxxxxxx]
> Sent: 13 May 2001 19:55
> To: ukha_d@xxxxxxx
> Subject: RE: [ukha_d] IR Blasters
>
>
> How so Mark? I cannot see the reason giving a signal from a blaster or
> signals from the likes of a Pronto are any different.
>
> K.
>
>  -----Original Message-----
> From: 	Mark McCall [mailto:mark@xxxxxxx]
> Sent:	13 May 2001 15:20
> To:	ukha_d@xxxxxxx
> Subject:	Re: [ukha_d] IR Blasters
>
> Blasters (in my opinion) are a bad idea.  They are easily setup but
rarely
> as reliable as individual emitters on each bit of gear.
>
>




Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/



_________________________________________________________

Do You Yahoo!?

Get your free @yahoo.com address at http://mail.yahoo.com






Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/




Home | Main Index | Thread Index

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.