[Date Prev][Date
Next][Thread Prev][Thread Next][Date
Index][Thread Index]
RE: Swish @ B&Q
- To: <ukha_d@xxxxxxx>
- Subject: RE: Swish @ B&Q
- From: "Phillip Harris" <phillip.harris1@xxxxxxx>
- Date: Sun, 25 Mar 2001 23:12:42 +0100
- Delivered-to: rich@xxxxxxx
- Delivered-to: mailing list ukha_d@xxxxxxx
- Mailing-list: list ukha_d@xxxxxxx; contact
ukha_d-owner@xxxxxxx
- Reply-to: ukha_d@xxxxxxx
I have the info that you're after ... Li at Laser mailed it to me some time
ago. I haven't got round to trying the information out yet. I hope he won't
mind if I mail it to you directly.
Phil
> -----Original Message-----
> From: Ian Lowe [mailto:ian@xxxxxxx]
> Sent: 25 March 2001 21:13
> To: ukha_d@xxxxxxx
> Subject: Re: [ukha_d] Swish @ B&Q
>
>
> I found the tracks over beside the "normal" curtain tracks,
but had to
> rummage to find the motors.
>
> In one case, I found the motor hidden in behind a pile of net
> curtain rods,
> in another store they were in a battered "swish" display
box. one thing is
> for sure: these have not been flying off of the shelves. both of
> the boxes I
> got were about three inches deep in dust.
>
> okay, I'm exaggerating, but not by much!
>
> As an aside, I had to use a bit of Gaffer tape (as a temporary
measure) to
> let the curtain slide msoothly past my radiators rather than catching
on
> them, and not closing properly. Anyone have an ingenious solution to
this?
>
> Also, I see in the archives a mention of the pinouts for the K400 RJ11
> sockets. Does nayone have this info? Kwong?
>
> On, >yet< another note that's me and the Fully home automation
compliant
> missus booked up for Hometech.. See you all there!
>
> Ian.
>
>
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>
Home |
Main Index |
Thread Index
|