The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024

Latest message you have seen: RE: Looking for solid state relay mounting box


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: TouchPad


  • To: ukha_d@xxxxxxx
  • Subject: RE: TouchPad
  • From: "Gareth Cook/STA/Lotus" <gcook@xxxxxxx>
  • Date: Thu, 22 Mar 2001 13:49:25 +0000
  • Delivered-to: rich@xxxxxxx
  • Delivered-to: mailing list ukha_d@xxxxxxx
  • Mailing-list: list ukha_d@xxxxxxx; contact ukha_d-owner@xxxxxxx
  • Reply-to: ukha_d@xxxxxxx


I have comfort - but to control it would need an IR module to control it or an x10 interface for the x10 system - either which is excessive.

And as for the push cathc - that's a nono - the doors will have a very thin edging to go over the gap between the door and frame (like a picture frame) - so you couldn't push it in, as it would be flush.

G.
Gareth Cook
Senior Engineering Specialist

GeT IT Engineering,Networks,Security
IBM SWG, Lotus Park, Staines, TW18 3AG
Office:  +44 (0) 1784 445 166
Mobile:  +44 (0) 7980 445 166
Fax:      +44 (0) 1784 499 166
Work: gcook@xxxxxxx
Personal:
g@xxxxxxx
AOL AIM : theboyg
Pager : gpage.csc1@xxxxxxx


----- Forwarded by Gareth Cook/STA/Lotus on 22/03/2001 13:56 -----
Discussion
Main Topic

"Graham Howe" <graham@xxxxxxx>
Today 12:34

.
Subject:
.
RE: [ukha_d] TouchPad
.
Category:



Do you have Homevision or Comfort, if so then how about getting them to open it via infra red command, that would be very cool. Alternatively how about one of those momentary switches (sometimes called bell push or push to make). Finally you could dispense with the electronic solution completely and use the magnetic 'push' catches that are often found behind the glass doors on TV cabinets, this would allow push+hold to close, push+release to open with no visible handles.
 
Graham
-----Original Message-----
From:
Gareth Cook/STA/Lotus [mailto:gcook@xxxxxxx]
Sent:
22 March 2001 12:13
To:
ukha_d@xxxxxxx
Subject:
[ukha_d] TouchPad


Hi


I have a hidden cupboard with all my AV gear. There will be a side door, but as it's all in white, I want to not have handles to open it (grubby marks, etc - and look sbetter !). RS have some solenoid actuators I can use to open to door electronically (a  little push rod when sent a voltage) - but what I now want is a little touchpad you can press with your finger and can relay this voltage to the actuator...


Anyone got any ideas on where to look ?


Thanks !


G.
Gareth Cook
Senior Engineering Specialist

GeT IT Engineering,Networks,Security
IBM SWG, Lotus Park, Staines, TW18 3AG
Office:  +44 (0) 1784 445 166
Mobile:  +44 (0) 7980 445 166
Fax:      +44 (0) 1784 499 166
Work: gcook@xxxxxxx
Personal:
g@xxxxxxx
AOL AIM : theboyg
Pager : gpage.csc1@xxxxxxx




Your use of Yahoo! Groups is subject to the
Yahoo! Terms of Service.
Yahoo! Groups Sponsor
www.debticated.com


Your use of Yahoo! Groups is subject to the
Yahoo! Terms of Service.

Yahoo! Groups Sponsor
www.newaydirect.com

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

Home | Main Index | Thread Index

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.