The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: TouchPad


  • To: ukha_d@xxxxxxx
  • Subject: Re: TouchPad
  • From: "Gareth Cook/STA/Lotus" <gcook@xxxxxxx>
  • Date: Thu, 22 Mar 2001 14:16:32 +0000
  • Delivered-to: rich@xxxxxxx
  • Delivered-to: mailing list ukha_d@xxxxxxx
  • Mailing-list: list ukha_d@xxxxxxx; contact ukha_d-owner@xxxxxxx
  • Reply-to: ukha_d@xxxxxxx


Sure - go to www.rswww.com

stock number is 389-5025

Not sure if it it an actuator that takes a voltage - I'm no expert...if not - i'm back to square one.

G.
Gareth Cook
Senior Engineering Specialist

GeT IT Engineering,Networks,Security
IBM SWG, Lotus Park, Staines, TW18 3AG
Office:  +44 (0) 1784 445 166
Mobile:  +44 (0) 7980 445 166
Fax:      +44 (0) 1784 499 166
Work: gcook@xxxxxxx
Personal:
g@xxxxxxx
AOL AIM : theboyg
Pager : gpage.csc1@xxxxxxx


----- Forwarded by Gareth Cook/STA/Lotus on 22/03/2001 13:58 -----
Discussion
Main Topic

"Stuart Whyte" <stuart@xxxxxxx>
Today 12:40

.
Subject:
.
[ukha_d] Re: TouchPad
.
Category:



Gareth,

Do you have the RS part number for the solenoids??  Ive been looking
to do something like this for a while, but could never find the parts.

Cheers

Stuart


--- In ukha_d@y..., "Graham Howe" <graham@s...> wrote:
> Do you have Homevision or Comfort, if so then how about getting
them to open
> it via infra red command, that would be very cool. Alternatively
how about
> one of those momentary switches (sometimes called bell push or push
to
> make). Finally you could dispense with the electronic solution
completely
> and use the magnetic 'push' catches that are often found behind the
glass
> doors on TV cabinets, this would allow push+hold to close,
push+release to
> open with no visible handles.
>
> Graham
>   -----Original Message-----
>   From: Gareth Cook/STA/Lotus [mailto:gcook@l...]
>   Sent: 22 March 2001 12:13
>   To: ukha_d@xxxxxxx >   Subject: [ukha_d] TouchPad
>
>
>
>   Hi
>
>   I have a hidden cupboard with all my AV gear. There will be a
side door,
> but as it's all in white, I want to not have handles to open it
(grubby
> marks, etc - and look sbetter !). RS have some solenoid actuators I
can use
> to open to door electronically (a  little push rod when sent a
voltage) -
> but what I now want is a little touchpad you can press with your
finger and
> can relay this voltage to the actuator...
>
>   Anyone got any ideas on where to look ?
>
>   Thanks !
>
>   G.
>           Gareth Cook
>         Senior Engineering Specialist
>         GeT IT Engineering,Networks,Security
>         IBM SWG, Lotus Park, Staines, TW18 3AG  Office:  +44 (0)
1784 445
> 166
>         Mobile:  +44 (0) 7980 445 166
>         Fax:      +44 (0) 1784 499 166  Work: gcook@xxxxxxx >         Personal: g@xxxxxxx >         AOL AIM : theboyg
>         Pager : gpage.csc1@xxxxxxx >
>
>         Yahoo! Groups Sponsor
>
>
>
>   Your use of Yahoo! Groups is subject to the Yahoo! Terms of
Service.



Home | Main Index | Thread Index

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.