[Date Prev][Date
Next][Thread Prev][Thread Next][Date
Index][Thread Index]
RE: Re: LD10 and "buzzing" fuse at the consumer unit
- To: "'ukha_d@xxxxxxx'" <ukha_d@xxxxxxx>
- Subject: RE: Re: LD10 and "buzzing" fuse at the
consumer unit
- From: Mark Harrison <Mark.Harrison@xxxxxxx>
- Date: Fri, 8 Jun 2001 15:39:07 +0100
- Delivered-to: rich@xxxxxxx
- Delivered-to: mailing list ukha_d@xxxxxxx
- Mailing-list: list ukha_d@xxxxxxx; contact
ukha_d-owner@xxxxxxx
- Reply-to: ukha_d@xxxxxxx
Keith Doxey writes:
> If your plumber simply replaced one with an MCB it could be a Wylex
consumer
> unit. I believe B&Q stock bits for them.
Personally, Keith, I'd get an electrician to do this. My plumber's a bit
unreliable ;-)
Mark Harrison
IT Controller, eKingfisher
****************************************************************************
Kingfisher plc
Registered Office: North West House, 119 Marylebone Road, London NW1 5PX
Registered in England, Number 1664812
This e-mail is only intended for the person(s) to whom it is addressed and
may contain confidential information. Unless stated to the contrary, any
opinions or comments are personal to the writer and do not represent the
official view of the company. If you have received this e-mail in error,
please notify us immediately by reply e-mail and then delete this message
from your system. Please do not copy it or use it for any purposes, or
disclose its contents to any other person. Thank you for your
co-operation.
****************************************************************************
____________________________________
Automated Home UK
http://www.automatedhome.co.uk
____________________________________
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
Home |
Main Index |
Thread Index
|