RE: Whole House Audio

["Michael Mc Aree" <michael.mcaree@xxxxxxx>]

I would certainly be interested in the Maplin part number.

M

> -----Original Message-----
> From: Clive Dilley [mailto:clive@xxxxxxx]
> Sent: 14 February 2001 14:46
> To: 'ukha_d@xxxxxxx'
> Subject: RE: [ukha_d] Whole House Audio
>
>
> I currently use a speaker distribution device from Maplin (about 20
quid)
> that allows up to 5 speaker-pairs to be switched on-off independently.
I
> also use in-wall mounted volumes controllers from Radio Shack
> (acquired in
> the US) - cost around 20 quid each. These work  quite well except that
I
> have to manually operate the Maplin box from the HA cupboard as it
cannot
> be controlled via IR.
>
> Radio Shack (US) also sell in-wall mounted speaker selection boxes
that
> could be placed in each room.
>
> If you want the parts numbers of either - let me know
>
>
> Clive
> --------
>
>
>
> its a little rough but you can use a 12v relay with plug pack
> plugged in to
> an appliance module, when the power is cut to the relay it breaks the
line
> to the speaker, stopping the music in that room.
>
>
> -----Original Message-----
> From: Paul Miller [mailto:pmiller@xxxxxxx]
> Sent: Saturday, 10 February 2001 4:04
> To: ukha_d@xxxxxxx
> Subject: RE: [ukha_d] Whole House Audio
>
>
> I use RF wireless speakers at ?20 a pair, and one in each room, as I
don't
> require stereo I set them to mono. no good if they HAVE to be ceiling
> mounted though.
>
>
>
> -----Original Message-----
> From: Michael Mc Aree [mailto:michael.mcaree@xxxxxxx]
> Sent: 09 February 2001 14:58
> To: ukha_d@xxxxxxx
> Subject: [ukha_d] Whole House Audio
>
>
> Anyone got any tips on how to set up a cheap whole house audio
solution? I
> basically want to to have a stereo in the bedroom linked to ceiling
mouted
> speakers in each room. Is it as simple as connecting a bit of
> speaker cable
> from the back of the stereo to each of the ceiling mounted speakers?
How
> can
> I independently switch off each speaker?
>
> On Sunday, February 11, 2001 8:19 PM, rj@xxxxxxx [SMTP:rj@xxxxxxx]
> wrote:
> >  << File: ATT00008.txt; charset = windows-1252 >>
>


###############################################
This e-mail, and any attachment, is confidential. If you have received
it in error, please delete it from your system, do not use or disclose
the information in any way, and notify me immediately. The contents of
this message may contain personal views which are not the views of the
company, unless specifically stated.
#################################################