The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Mains help


  • To: <ukha_d@xxxxxxx>
  • Subject: Mains help
  • From: "steve" <steve@xxxxxxx>
  • Date: Thu, 16 Aug 2001 11:43:56 +0100
  • Delivered-to: rich@xxxxxxx
  • Delivered-to: mailing list ukha_d@xxxxxxx
  • Mailing-list: list ukha_d@xxxxxxx; contact ukha_d-owner@xxxxxxx
  • Reply-to: ukha_d@xxxxxxx

At the moment on node 0. I have mainly comfort & a few other bits. Two unswitched fused spurs are fed via a 2.5mm cable from consumer unit. One fused spur is for comfort & the other feeds a couple of 4 way blocks.
 
I now need to add supply to the comfort expansion SEP01 and provide power for 16 relay controlled circuits. (Each relay has its own fuse)
 
How or what is the proper way i should do this ?
 
Steve
 

Yahoo! Groups Sponsor

For more information: http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe:  ukha_d-subscribe@xxxxxxx
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
List owner:  ukha_d-owner@xxxxxxx

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

Home | Main Index | Thread Index

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.