RE: Re: Homeseer and voice

[andy.powell@xxxxxxx]

What worries me is that I clearly remember the post...I have no life (as=20
my wife often reminds me) ;-)

A.




Keith Doxey <ukha.diyha@xxxxxxx>
26/04/2001 15:43
Please respond to ukha_d

=20
To:     ukha_d <ukha_d@xxxxxxx>
cc:=20
Subject:        RE: [ukha_d] Re: Homeseer and voice

About a year ago I attended a lecture given by Prof Heinz Wolff and he
mentioned that he got good results using a program called "Game
Commander"
from http://www.gamecommander.com He
couldnt get it to recognise words like
"Help" but it was very good at "Get Out Of The Cockpit"
which could be All
Units OFF. "Phasers to full" could be All Lights ON :-))

Keith

-----Original Message-----
From: Oliver Pell [mailto:odp@xxxxxxx]
Sent: Thursday, April 26, 2001 11:17
To: ukha_d@xxxxxxx
Subject: [ukha_d] Re: Homeseer and voice


I've done quite a bit of experimentation with Homeseer and voice=20
recognition
and I'm not at all convinced you're going to get any results worth writing
home about after spending =A350 :-(. Speakers really don't matter - if=20
you're
only using them for TTS anyway - but the quality of the microphone does. I
spent a couple of weeks trying a headset plugged into my computer but (as
expected) it was only any use if I was wearing the headset and the sound
quality was lousy. In the end I shelled out for an Audiotec Pro42 mic from
Stage Electrics and got a phantom power source from LetsAutomate - voice
recognition does work all around the room now. The sound volume is really
low - but obviously high enough for the computer to understand. I was
getting 80-90% command recognition, I would say.

My current plans are probably to get one of LetsAutomate's mixers so I can
connect more than one mic (and hopefully that'll boost the volume as=20
well).

Have you tried the voice recognition so far? Homeseer comes with the MS
voice recognition engine which only seems to really work well (as far as=20
VR
ever works well) with American accents. I would recommend getting a hold=20
of
a commercial VR program, training it, and then using that engine - I'm=20
using
the Dragon NaturallySpeaking engine and the difference between it and MS=20
is
immense. There is then the slight problem that other people can't really=20
use
it without you putting in some fancy VBScript code to switch speakers but
this is a minor problem compared to the increase in recognition quality=20
(for
me, anyway).

Hope some of this helps,

Oliver.

Message: 18
Date: Thu, 26 Apr 2001 10:00:42 +0100
From: "Gareth Cook/STA/Lotus" <gcook@xxxxxxx>
Subject: HomeSeer and Voice

ok - I've installed HomeSeer. I have a server in my loft, and I'd like to
use voice recognition and text to speech.

So - where do I start ? Any recommendations for microphone and speakers,
and placement, and shielded cable types ?
<snip>





Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/





=20

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/






*
********************** DISCLAIMER **************************
This message is intended only for use by the person
to whom it is addressed. It may contain information
that is privileged and confidential. Its content does
not constitute a formal commitment by Lombard Odier.
If you are not the intended recipient of this message,
kindly notify the sender immediately and destroy this
message. Thank you.
*************************************************************