The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: Re: Baby phone switches


  • To: ukha_d <ukha_d@xxxxxxx>
  • Subject: RE: Re: Baby phone switches
  • From: Keith Doxey <keith.doxey@xxxxxxx>
  • Date: Fri, 13 Oct 2000 15:34:40 +0100
  • Delivered-to: rich@xxxxxxx
  • Delivered-to: mailing list ukha_d@xxxxxxx
  • Mailing-list: list ukha_d@xxxxxxx; contact ukha_d-owner@xxxxxxx
  • Reply-to: ukha_d@xxxxxxx

With Home Highway you can have 2 simultaneous calls of ANY type.

I have a Terminal adapter connected to the ISDN port and BOTH voice ports
can be used on that the TA at the same time with both presenting the
Digital
number as CLI.

I use my setup as follows.....

Analogue 1 Personal published voice number with incoming CLI
Analogue 2 Personal Ex Directory number with incoming CLI

Digital Number
Outgoing data calls from Speedway ISDN card in main PC and Ignition TA for
laptop/other PC
Outgoing voice calls via TA analogue ports presenting the ISDN number
Incoming voice calls via TA analogue ports. functions as a 2 line PBX.
ie both analog ports have same number.

I use the digital number as my contact number when working from home so I
know it is work calling and they dont need to know my "proper"
home number.
If the TA is unplugged then the digital number is Unobtainable to incoming
voice calls.

Remember that any data call in progress will mean you only have ONE voice
line available and surfing at 128k means you are not contactable by voice.

Keith

> -----Original Message-----
> From: Mark Harrison [mailto:Mark@xxxxxxx]
> Sent: 13 October 2000 15:11
> To: ukha_d@xxxxxxx
> Subject: RE: [ukha_d] Re: Baby phone switches
>
>
> I was more interested in two concurrent Outgoing calls...
>
> -----Original Message-----
> From: Nigel Orr [mailto:nigel@xxxxxxx]
> Sent: 13 October 2000 14:21
> To: ukha_d@xxxxxxx
> Subject: RE: [ukha_d] Re: Baby phone switches
>
>
> At 14:10 13/10/00 +0100, you wrote:
> >Thanks for that - There _was_ something I'd missed. I guess
> that a switch
> >that uses the two analogue channels may be what I want after
all...
>
> There's a combination of "Auxiliary Working" and
"Bypass
> Numbers" which
> might be of use to you if you are doing that, so that a
> second call coming
> in when one line is busy rolls over to the other line, was that the
> functionality you were hoping to get from a PABX on the data port?
>
> The exact incantation to ask BT for it was discussed in
news:uk.telecom in
mind-numbing detail a while back... and I can't remember if the above two
services are the right ones as I didn't pay too much attention at the time!

Nigel












-------------------------- eGroups Sponsor -------------------------~-~>
No bidding, no
guesswork.  Just
great fares at Hotwire.
http://click.egroups.com/1/9750/9/_/2065/_/971447705/
---------------------------------------------------------------------_->





Home | Main Index | Thread Index

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.