[Date Prev][Date
Next][Thread Prev][Thread Next][Date
Index][Thread Index]
Re: IR543AH and .ccf file PROBLEM :-(
- To: ukha_d@xxxxxxx
- Subject: Re: IR543AH and .ccf file PROBLEM :-(
- From: Vince <vince@xxxxxxx>
- Date: Thu, 28 Dec 2000 21:26:15 +0000
- Delivered-to: rich@xxxxxxx
- Delivered-to: mailing list ukha_d@xxxxxxx
- Mailing-list: list ukha_d@xxxxxxx; contact
ukha_d-owner@xxxxxxx
- Reply-to: ukha_d@xxxxxxx
Hi Neil,
I've been using this setup for a few weeks now and it works fine. The only
problem I found was the "11" key in one of the supplied .ccf
files was bad
and this just happened to be the one I had used.
Try using the .ccf files that Mark has on his site (
http://www.automatedhome.co.uk/downloads/ir543ah.zip
).
Vince
At 21:04 28/12/00, you wrote:
>Don't know if anyone can help me with this...
>I just got my pronto and IR543AH...Using the .ccf file supplied on the
>floppy, the ON / OFF seems intermittant...
>All Housecodes and Unitcodes give a response from the LED on the
IR543AH,
>but the ON / OFF seem to work roughly 1 in 3 times.
>Looking at the ccf on prontoedit, the housecodes and unitcodes are
learned
>commands and the on / off just say (c) X10_ON and (c) X10_OFF can
anyone
>explain this (the Dim is like that and works everytime). Shouldn't the
>alias point to a button, I can't find buttons named as above??
>
>Any suggestions?
>
>thanks
>Neil
-------------------------- eGroups Sponsor -------------------------~-~>
Big News - eGroups is becoming Yahoo! Groups
Click here for more details:
http://click.egroups.com/1/10801/1/_/2065/_/978038716/
---------------------------------------------------------------------_->
Home |
Main Index |
Thread Index
|