[Date Prev][Date
Next][Thread Prev][Thread Next][Date
Index][Thread Index]
Re: Door Sensors
I used the screws supplied with the contacts and the vibration detectors.
The contact are on the bottom edge positioned with the screws going through
the upvc into a "redundant space" behind the seal. I also used
the screws
for the vibration detectors (some people won't recommend this) but so far I
have had no problems.
An alternaticve is to use hi-tac double sided tape (more so for vibration
detector) be aware some double sided tapes lose effectiveness through time,
avoid using spongy tape as this absorbs vibration.
Campbell
----- Original Message -----
From: <adrian.lucas@xxxxxxx>
To: <ukha_d@xxxxxxx>
Sent: Thursday, December 14, 2000 4:13 PM
Subject: RE: [ukha_d] Door Sensors
> On this subject anyone know how to mount door sensors on uPVC doors?
Perhaps the sensors are
> light enough for short screws or maybe glue is better? If so, what
type
of glue - don't want to disolve the uPVC!
>
> Adrian Lucas
>
>
>
>
>
-------------------------- eGroups Sponsor -------------------------~-~>
eLerts
It's Easy. It's Fun. Best of All, it's Free!
http://click.egroups.com/1/9699/1/_/2065/_/976905604/
---------------------------------------------------------------------_->
Home |
Main Index |
Thread Index
|