The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024

Latest message you have seen: RE: OT: Web site speed


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: CAT5 AV units nearly finished!! (Was)Any recommendations?


  • To: <ukha_d@xxxxxxx>
  • Subject: Re: CAT5 AV units nearly finished!! (Was)Any recommendations?
  • From: "Roger Bilboul" <Bilboul@xxxxxxx>
  • Date: Fri, 5 Mar 1999 10:18:54 -0000
  • Delivered-to: listsaver-egroups-ukha_d@xxxxxxx
  • Mailing-list: contact ukha_d-owner@xxxxxxx
  • Reply-to: ukha_d@xxxxxxx

Many thanks Keith, I will let you know how I progress.

-----Original Message-----
From:	Keith Doxey [mailto:keith.doxey@xxxxxxx]
Sent:	03 March 1999 12:35
To:	'ukha_d@xxxxxxx'
Subject:	RE: [ukha_d] Re: CAT5 AV units nearly finished!! (Was)Any
recommendations?

Hi Roger,

Just looked in the new Maplin Catalogue.
Pages 213 and 214

Van Damme Professional Video Cable.
5 individual 75ohm cores

XX92A Red Series 5 Way Vid (Overall diameter 18.7mm) £4-99 per metre.
XS63T Miniature 5 Core Cable (Overall diameter 9.6mm) £8-49 per metre.

I havent used either of the above, but if you decide to try them please
report back to the group so that we all know. Be warned that trying to
fit even the 9.6mm diameter cable into a 15HD VGA connector will be a
nightmare resulting in several burnt fingers :-((

The cable I used at work was 5 individual 75ohm coax and 2 twisted
pairs for audio. Overall diameter was about 12mm. I found it easiest
to remove the grey outer sheath for about 150mm and feed the 5
individual coax cables into the VGA plug. It makes it much more
flexible and less and less likely to damage your equipment as the cable
is quite heavy and will not bend to much less than a 150mm radius.
Also make sure that all 3 of the RGB cables are exactly the same length
or the image will be misaligned.

Hope that helps

Keith

Keith Doxey
http://www.btinternet.com/~krazy.keith
Krazy Keith's World of DIY HomeAutomation

----------
From: 	Roger Bilboul[SMTP:roger@xxxxxxx]
Sent: 	02 March 1999 16:21
To: 	ukha_d@xxxxxxx
Subject: 	[ukha_d] Re: CAT5 AV units nearly finished!! (Was)Any
recommendations?

This is my first posting to this high quality discussions. Can Keith tell
me
where you can get good quality VGA cable (by the metre)from? I have an
iiyama Vision Master pro monitor and I need to reach my computer
approximately 4 to 5 metres away. A cable I bought off the shelf has
degraded the quality of the display.
Many thanks in advance.





------------------------------------------------------------------------
Internet FileZone: Always FREE!
Instantly store & access your valuable PC files on the net,
from any Web browser.
SIGN UP NOW - http://offers.egroups.com/click/235/0

eGroup home: http://www.eGroups.com/list/ukha_d
Free Web-based e-mail groups by eGroups.com

<<attachment: winmail.dat>>


Home | Main Index | Thread Index

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.