The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: Another X10 question


  • To: ukha_d@xxxxxxx
  • Subject: RE: Another X10 question
  • From: Gordon Christie <homeautomation@xxxxxxx>
  • Date: Mon, 3 Dec 2001 09:59:55 +0000 (GMT)
  • Delivered-to: mailing list ukha_d@xxxxxxx
  • Mailing-list: list ukha_d@xxxxxxx; contact ukha_d-owner@xxxxxxx
  • Reply-to: ukha_d@xxxxxxx


Steve,

Thanks. That's exactly the information I was looking for. I'd be looking
to control it using software I'm writing for the TINI board that I
mentioned before, which would probably involve writing the interface
classes myself, or using previous examples to help me, so unfortunately
ActiveX isn't an option.

Thanks again for your help.

~Gordon


On Mon, 3 Dec 2001, Steve Morgan wrote:
> Gordon,
>
> The kit comes with a CM12U. The protocol is freely available from
X-10, but
> it's a bit of a pain in the backside to program for. You might be
better off
> either using the Homeseer ActiveX control, or using Homeseer and doing
your
> programming through scripting.
>
> Cheers,
> Steve
>
> -----Original Message-----
> From: Gordon Christie [mailto:homeautomation@xxxxxxx]
> Sent: 03 December 2001 09:17
> To: ukha_d@xxxxxxx
> Subject: [ukha_d] Another X10 question
>
>
>
> Hi again,
>
> After recommendation, I am pondering purchasing the following kit:
>
> http://www.protectdirect.tv/iashop.php?function=viewprod&ID=21
>
> which should give me the modules I need to have a basic test rig for
my
> software. I would appreciate it if someone could identify the
Interface
> Module that is bundled with this kit, and indicate whether it's
suitable
> for my purposes (i.e. has a freely available protocol sheet that I can
use
> to implement software, or better yet, freely available code that I can
use
> directly). I called their sales line, and they weren't able to tell
me.
>
> I suspect that this is the CM12U, or the XM10U - it would presumably
be
> better if it was the former, rather than the latter..
>
> Thanks for your help.
>
> ~Gordon Christie
> homeautomation@xxxxxxx
>
>
>
> For more information: http://www.automatedhome.co.uk
> Post message: ukha_d@xxxxxxx
> Subscribe:  ukha_d-subscribe@xxxxxxx
> Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
> List owner:  ukha_d-owner@xxxxxxx
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>


For more information: http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe:  ukha_d-subscribe@xxxxxxx
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
List owner:  ukha_d-owner@xxxxxxx

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/


Home | Main Index | Thread Index

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.