yes
- The mains comes
>from
switch.
yes
- The live to the
light comes from the LD11 and the Neutral comes from the X10 consumer
unit.
yes
- The (momentary)
light switch live comes from the X10 consumer unit, the neutral comes from
the LD11.
there is only a live connection to the
momentary
i.e.
live > switch >momentary connection
- They will work
without any X10 interface and will just switch on/off, dim from the
switch.
yes
- When using an
X10
interface such as with comfort, the interface sits before the first X10
consumer unit.
It
sits anywhere
- The X10
interface
can sit anywhere on the mains and control the X10
devices.
yes
- If I have
upstairs and downstairs on different MCB's in the house consumer unit then
I
would need more than one X10 interface.
no
but interference can in some cases be a
problem
On a
normal size house though it will all work
you
should only really use one interface per controler
If
you are crossing phases then you use a filter on each phase to couple
through
the signal
- I can control a
series of say 6 mains halogen lights as long as I don't go over
700watts
yes they will all go on and
off
together
for safety I never go right up
to
the Max wattage though
Sorry for being a bit long winded but
don't want to mess it up.
buy a cheap controler
and a
plug in module first and have a
play
if you are thinking of a
big
install it will save you
money
Mike
| Yahoo! Groups
Sponsor |
ADVERTISEMENT
;) | |
|
For
more information: http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe:
ukha_d-subscribe@xxxxxxx
Unsubscribe:
ukha_d-unsubscribe@xxxxxxx
List owner:
ukha_d-owner@xxxxxxx
Your use of Yahoo! Groups is
subject to the Yahoo! Terms of
Service.