The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024


[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]

RE: [KAT5] RGB/svideo->VGA


  • Subject: RE: [KAT5] RGB/svideo->VGA
  • From: "aashram" <groups@xxxxxxxxxxx>
  • Date: Fri, 29 Jul 2005 09:52:52 +0100

thanks Keith

thought I could just have a lead of some sort made up :-) wish full think I
guess

I have 3 screens dotted around the house (with no pc connected)
and want to send the same signal to them all
from node0.

any suggestions ?



________________________________

From: kat5-users@xxxxxxx on behalf of Keith Doxey
Sent: Fri 29/07/2005 09:50
To: kat5-users@xxxxxxx
Subject: RE: [KAT5] RGB/svideo->VGA



Hi Aashram,

I dont have a VGA unit yet but it is under development.

There are standalone converters that will take an S-Video or Composite
signal and convert it to VGA. They tend to cost around ?70 - ?100.
Standalone converters that upscale RGB are more expensive.

If you have a PC connected to the LCD then consider the Sweetspot card from
http://www.pluggedin.tv/sweetspot

Regards

Keith

> -----Original Message-----
> From: kat5-users@xxxxxxx [mailto:kat5-users@xxxxxxx]On
> Behalf Of aashram
> Sent: 29 July 2005 09:41
> To: kat5-users@xxxxxxx
> Subject: [KAT5] RGB/svideo->VGA
>
>
> keith
>
> is it possible to transfer vga using the KAT5 ? better still can
> I take the s-video or rgb signal from the kat5 and turn it into a
> vga so I can view the picture on a lcd screen ?
>
>
>
> [Non-text portions of this message have been removed]
>
>
>
>
> Searchable KAT5 archive can be found at
> http://www.ukha-archive.com/
> Yahoo! Groups Links
>
>
>
>
>
>
>
>




Searchable KAT5 archive can be found at
http://www.ukha-archive.com/

KAT5 Main Index | KAT5 Thread Index | KAT5 Home | Archives Home

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.