[Message Prev][Message
Next][Thread Prev][Thread Next][Message
Index][Thread Index]
RE: [KAT5] KAT5-FirM...Xantech
- Subject: RE: [KAT5] KAT5-FirM...Xantech
- From: "Keith Doxey" <kat5users@xxxxxxxxxxx>
- Date: Wed, 9 Feb 2005 20:30:31 -0000
Excellent work Frank,
I hope to get my FirM kit rigged up this weekend
Keith
> Subject: [KAT5] KAT5-FirM...Xantech
>
> Well i did the hardware mods to FirM and made up a cat5 /
3.5mm
> adaptor and connected it to the ir out of my KAT5 IR TX device and
to a
> FirM Zone input ...Connected the ir out of my FirM test unit
..(normally
> goes to an emitter located next to hv ir rx) ..to my dvd player and it
> WORKS!!!!...;-))....and i have zone rx identification as
> well...........;-)...........
>
> Anybody interested in a Xantech Zoning solution?????...Which should
also
> have zone tx ir available at each receiver location as well as
> Node 0 (like
> FirM Rx units).....
> More Soon
> Frank
>
> www.armaghelectrical.com.au
>
Searchable KAT5 archive can be found at
http://www.ukha-archive.com/
KAT5 Main Index |
KAT5 Thread Index |
KAT5 Home |
Archives Home
|