|
|
The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024
|
|
|
[Message Prev][Message
Next][Thread Prev][Thread Next][Message
Index][Thread Index]
[KAT5] KAT5-FirM...Xantech
- Subject: [KAT5] KAT5-FirM...Xantech
- From: "Frank Mc Alinden" <fmcalind@xxxxxxxxxxxxxx>
- Date: Wed, 9 Feb 2005 17:04:43 +1100
Hi All
Well i did the hardware mods to FirM and made up a cat5 / 3.5mm
adaptor and connected it to the ir out of my KAT5 IR TX device and to a
FirM Zone input ...Connected the ir out of my FirM test unit ..(normally
goes to an emitter located next to hv ir rx) ..to my dvd player and it
WORKS!!!!...;-))....and i have zone rx identification as
well...........;-)...........
Anybody interested in a Xantech Zoning solution?????...Which should also
have zone tx ir available at each receiver location as well as Node 0
(like
FirM Rx units).....
More Soon
Frank
www.armaghelectrical.com.au
Searchable KAT5 archive can be found at
http://www.ukha-archive.com/
KAT5 Main Index |
KAT5 Thread Index |
KAT5 Home |
Archives Home
|
|