RE: Craplins RJ45 Splitter

[Kenneth Watt]

Bugger!

That makes wiring up CAT5 a bit of a pig at the moment and in so doing
giving me two options...

1. re-wire the CAT5 when I get the time.

2. wait for the switcher

Knowing me, option 2 will come around sooner than option 1 does!

K.

> -----Original Message-----
> From: Keith Doxey [mailto:<a
href="/group/kat5-users/post?postID=kV72UVuNIQW-qiIu2Ktn26CZszvqW-3t53jWsLCO7mvsopI47Fm1ZloCQ8i1hPxSfPQVQvwrASWB9wTTZTW8TEI">keith.doxey@b...</a>]
> Sent: 25 March 2002 06:17
> To: <a
href="/group/kat5-users/post?postID=SXhwZUaizP4Sh0eDxxyQZxXLb8Fe0ZjgK8ausItKtgdkq5BKUBwhZN9ESIi6VfexCXiz13Lq7P4fmvNHrdVfX-6q9gI">kat5-users@xxxxxxx</a>
> Subject: RE: [KAT5] Craplins RJ45 Splitter
>
> Hi Ken,
>
> The resistors to remove from ONE of the receivers are
>
> R601 and R607 both 100R shown in Yellow
> R501 and R507 both 620R shown in Red
>
>
> You must run from the Transmitter, to Receiver1 (unterminated and
fitted
> with the splitter) to Receiver2.
>
> Details here <a href="http://www.btinternet.com/~diyha/kat5/daisychain.html";>http://www.btinternet.com/~diyha/kat5/daisychain.html</a>
>
> Hope that helps.
>
> Keith
>
> www.diyha.co.uk
> www.kat5.tv
>
>
> -----Original Message-----
> From: Kenneth Watt [mailto:<a
href="/group/kat5-users/post?postID=33O8oGU3x5UKCNmfc_H7zxoUe_QcRsUOJ57WseRFBExSiqbXBp0HmIc1aQBAXZgmcO7NjtukWBVUAM9saUE">kennwatt@b...</a>]
> Sent: 24 March 2002 23:43
> To: <a
href="/group/kat5-users/post?postID=SXhwZUaizP4Sh0eDxxyQZxXLb8Fe0ZjgK8ausItKtgdkq5BKUBwhZN9ESIi6VfexCXiz13Lq7P4fmvNHrdVfX-6q9gI">kat5-users@xxxxxxx</a>
> Subject: RE: [KAT5] Craplins RJ45 Splitter
>
>
> Sorry Keith poor terminology by yours truly, it is the Maxview TP727
> Double Adaptor not a splitter as such, I worded it wrongly...oops :-)
>
> Okay, what resistors removed? Bear in mind here that, whilst my
> knowledge of electronics is getting slightly better through UKHA_D,
I'm
> not the greatest with them little bits ;-)
>
> What I have is one of the doublers plugged into a KAT5 TX with a
doubler
> on the front, one CAT5 goes to an RX in the lounge and one goes to an
RX
> in the bedroom but I did not open the case! This is something I
wouldn't
> do without instruction to do so.
>
> K.
>
> > -----Original Message-----
> > From: Keith Doxey [mailto:<a
href="/group/kat5-users/post?postID=kV72UVuNIQW-qiIu2Ktn26CZszvqW-3t53jWsLCO7mvsopI47Fm1ZloCQ8i1hPxSfPQVQvwrASWB9wTTZTW8TEI">keith.doxey@b...</a>]
> > Sent: 24 March 2002 21:54
> > To: <a
href="/group/kat5-users/post?postID=SXhwZUaizP4Sh0eDxxyQZxXLb8Fe0ZjgK8ausItKtgdkq5BKUBwhZN9ESIi6VfexCXiz13Lq7P4fmvNHrdVfX-6q9gI">kat5-users@xxxxxxx</a>
> > Subject: RE: [KAT5] Craplins RJ45 Splitter
> >
> > Interesting :-(
> >
> > Sound as if the one you got was a SPLITTER not a DOUBLER which
was
> what I
> > was worried about in the first place.
> >
> > The ones I received were made by MAXVIEW (TP727)
> >
> > Packaged in a green blister pack.
> >
> > Can you use a multimeter to tap out the connections and see what
they
> are.
> > If they are not the same as mine then I would suggest that Maplin
> should
> > refund as they are not what they claim to be.
> >
> > "PU96E RJ45 Double Adapters £3-99"
> >
> > Not RJ45 SPLITTER.
> >
> > You do still need to DAISY CHAIN the units and intermediate ones
must
> have
> > the termination resistors removed.
> >
> > Keith
> >
> > -----Original Message-----
> > From: Kenneth Watt [mailto:<a
href="/group/kat5-users/post?postID=33O8oGU3x5UKCNmfc_H7zxoUe_QcRsUOJ57WseRFBExSiqbXBp0HmIc1aQBAXZgmcO7NjtukWBVUAM9saUE">kennwatt@b...</a>]
> > Sent: 24 March 2002 21:27
> > To: <a
href="/group/kat5-users/post?postID=SXhwZUaizP4Sh0eDxxyQZxXLb8Fe0ZjgK8ausItKtgdkq5BKUBwhZN9ESIi6VfexCXiz13Lq7P4fmvNHrdVfX-6q9gI">kat5-users@xxxxxxx</a>
> > Subject: [KAT5] Craplins RJ45 Splitter
> >
> >
> > I ordered up a few of the RJ45 splitters that were mooted about
this
> > week and they arrived on Saturday morning.
> >
> > Finally got around to trying one tonight and it doesn't work, or
at
> > least appears not to here. It introduces one hell of a noise from
the
> > right channel on sound and the video on one set was very
discoloured
> by
> > reds on one set while just appearing darker than it should on the
> other.
> >
> >
> > Ho hum, back to waiting on the mail that tells me that the
switcher
is
> > complete ;-)
> >
> > K.
> >
> >
> >
> >
> > To unsubscribe from this group, send an email to:
> > <a
href="/group/kat5-users/post?postID=Nh72HIN6ssVOJvFuFCl1b9Xgi_CwwsMDdt-cdysbPIhY80ZvCzXgemvXuOraHuqMvEGiT4Cltk8y4PkauW_S8vg0FCFolctC9oE">kat5-users-unsubscribe@xxxxxxx</a>
> >
> >
> >
> > Your use of Yahoo! Groups is subject to
> <a href="http://docs.yahoo.com/info/terms/";>http://docs.yahoo.com/info/terms/</a>
> >
> >
> >
> > ------------------------ Yahoo! Groups Sponsor
> >
> > To unsubscribe from this group, send an email to:
> > <a
href="/group/kat5-users/post?postID=Nh72HIN6ssVOJvFuFCl1b9Xgi_CwwsMDdt-cdysbPIhY80ZvCzXgemvXuOraHuqMvEGiT4Cltk8y4PkauW_S8vg0FCFolctC9oE">kat5-users-unsubscribe@xxxxxxx</a>
> >
> >
> >
> > Your use of Yahoo! Groups is subject to
> <a href="http://docs.yahoo.com/info/terms/";>http://docs.yahoo.com/info/terms/</a>
> >
>
>
>
>
>
> To unsubscribe from this group, send an email to:
> <a
href="/group/kat5-users/post?postID=Nh72HIN6ssVOJvFuFCl1b9Xgi_CwwsMDdt-cdysbPIhY80ZvCzXgemvXuOraHuqMvEGiT4Cltk8y4PkauW_S8vg0FCFolctC9oE">kat5-users-unsubscribe@xxxxxxx</a>
>
>
>
> Your use of Yahoo! Groups is subject to
<a href="http://docs.yahoo.com/info/terms/";>http://docs.yahoo.com/info/terms/</a>
>
>
> ------------------------ Yahoo! Groups Sponsor
>
> To unsubscribe from this group, send an email to:
> <a
href="/group/kat5-users/post?postID=Nh72HIN6ssVOJvFuFCl1b9Xgi_CwwsMDdt-cdysbPIhY80ZvCzXgemvXuOraHuqMvEGiT4Cltk8y4PkauW_S8vg0FCFolctC9oE">kat5-users-unsubscribe@xxxxxxx</a>
>
>
>
> Your use of Yahoo! Groups is subject to
<a href="http://docs.yahoo.com/info/terms/";>http://docs.yahoo.com/info/terms/</a>