RE: Switcher ....was...Digital Audio

[Keith Doxey]

Havent decided on the exact protocol yet but something like

C1S4 = channel 1 Source 4

C0S2 = All channels Source 2

C3V2A5 = channel 3, Video 2, Audio 5

Thats the bit that will be the hardest to get working !
In true Microsoft style there may be several software updates :-)

Keith

-----Original Message-----
From: Mike Griffiths [mailto:<a
href="/group/kat5-users/post?postID=-vjVWvRGr-KIY-yRjqcMDuKb1IXwQhmMH8xISrMQwgxWo72mAWf0d2j2RXSru_p3SvNCDpbwgQ">mike@a...</a>]
Sent: 09 January 2002 23:00
To: <a
href="/group/kat5-users/post?postID=RQEvzaHCScHsRXvG_MiYqKOfS2YzqdTQGHxzUka0f9CJUirEEAOKq5AathBZhGOiSedLdbMaIlmxq8RC8hLO468">kat5-users@xxxxxxx</a>
Subject: RE: [KAT5] Switcher ....was...Digital Audio


Hi Keith
I take it then the serial control will be simple asci
If so this means that ACE will control it as well :)
Mike

-----Original Message-----
From: Keith Doxey [mailto:<a
href="/group/kat5-users/post?postID=RI57FCowRdB5_UoXuRS1LZFTTK3cxBV5twcuFb06zMqOnNlhnMDYI3DKYwWSLEOj-sLvZDdo5cW6IAah">kat5users@d...</a>]
Sent: Wed 09 Jan 02 22:29
To: <a
href="/group/kat5-users/post?postID=RQEvzaHCScHsRXvG_MiYqKOfS2YzqdTQGHxzUka0f9CJUirEEAOKq5AathBZhGOiSedLdbMaIlmxq8RC8hLO468">kat5-users@xxxxxxx</a>
Subject: RE: [KAT5] Switcher ....was...Digital Audio

As stated, it will be built with support for HV.

That means commands can be sent to HV :-)

Keith

-----Original Message-----
From: Kenneth Watt [mailto:<a
href="/group/kat5-users/post?postID=SHFjSa8jx2dpnijPZwHEludm70HrLmY-8QYkZndVcrBpaVz9X6_QqHRS_FiqrS9GU1H95iQK0BQVih617Xgz8Q">kennwatt@b...</a>]
Sent: 09 January 2002 21:58
To: <a
href="/group/kat5-users/post?postID=RQEvzaHCScHsRXvG_MiYqKOfS2YzqdTQGHxzUka0f9CJUirEEAOKq5AathBZhGOiSedLdbMaIlmxq8RC8hLO468">kat5-users@xxxxxxx</a>
Subject: RE: [KAT5] Switcher ....was...Digital Audio


WOW!!!

I want one of those gizmos...RIGHT NOW!!!

One thing though Keith, and I believe someone asked this before, can I
connect it to a Xantech block as I use this for IR distribution at the
moment? Not that it's the be all and end all to me as anywhere there is
a KAT5 module there will also be a Xantech receiver.

Unless of course I can output a signal from a KAT5 or the switcher to
control HV...now that would be well cool :-)

K.

> -----Original Message-----
> From: Keith Doxey [mailto:<a
href="/group/kat5-users/post?postID=RI57FCowRdB5_UoXuRS1LZFTTK3cxBV5twcuFb06zMqOnNlhnMDYI3DKYwWSLEOj-sLvZDdo5cW6IAah">kat5users@d...</a>]
> Sent: 09 January 2002 21:50
> To: <a
href="/group/kat5-users/post?postID=RQEvzaHCScHsRXvG_MiYqKOfS2YzqdTQGHxzUka0f9CJUirEEAOKq5AathBZhGOiSedLdbMaIlmxq8RC8hLO468">kat5-users@xxxxxxx</a>
> Subject: RE: [KAT5] Switcher ....was...Digital Audio
>
> Hi Tony,
>
> IR will be the main control method recieving IR from the room you are
in
> to
> select the source you want to watch. It will also pass any received IR
> through to the source you have selected so using a Pronto or One4All
> remote
> you send the command [KAT5-Source4] where you have your digibox and
then
> send Digibox commands that pass through to the Digibox. The IR will be
> switched so that if you had 2 devices that responded to the same
remote eg
> two Videos, only the one you are watching would get the command.
>
> There will an LCD display on the front along with simple press button
> control eg Button 1 cycles through the rooms, button 2 cycles through
the
> sources. There will also be RS232 control to allow a PC or Homevision
to
> control it. Will also have support for HomeVision to overlay messages
and
> inject audio either superimposed or completely overriding the original
> audio.
>
> Keith
>
>
> -----Original Message-----
> From: BUTLER, Tony, FM [mailto:<a
href="/group/kat5-users/post?postID=fDeWJgcQ_vrrEnfIlpP93LDNJ1jVwIZNMAzYnqVxzvBfpAlId3HlxwdQIXUNXturs0oAhpmmSuAKu9I">tony.butler@r...</a>]
> Sent: 09 January 2002 10:03
> To: <a
href="/group/kat5-users/post?postID=6uOm-WgpaW_4gCGnbVSKVB_OWGdN1RXaPpbhf8V9O00HstcuPmFtUyzUAjjIvDg0Xj6FV0iMmzD8E6NX6vQ2pNKG">'kat5-users@xxxxxxx</a>'
> Subject: RE: [KAT5] Digital Audio
>
>
> > for now, the priority is to get normal IR launched as most
> > equipment will
> > work with that and I NEED IR to control the switcher.
>
> Though with IrDA you might be able to look to computer control :-)
>
> Actually, are u thinking of PC control/setup of the switcher???
> Could be v. easy to set up then for us dumb users!
>
> cheers,
>
>
> Tony
>
>
> ------------------------ Yahoo! Groups Sponsor
>
> To unsubscribe from this group, send an email to:
> <a
href="/group/kat5-users/post?postID=kVROHFRuYkEJrxESalpHz9exG4-kPgqJS9-czK3LLdVtX2NIFLkNvAgoJPX4-fPIIg4rKfFl5TlgGQpaTQFB4svhKmQ242pKdA">kat5-users-unsubscribe@xxxxxxx</a>
>
>
>
> Your use of Yahoo! Groups is subject to
<a href="http://docs.yahoo.com/info/terms/";>http://docs.yahoo.com/info/terms/</a>
>





To unsubscribe from this group, send an email to:
<a
href="/group/kat5-users/post?postID=kVROHFRuYkEJrxESalpHz9exG4-kPgqJS9-czK3LLdVtX2NIFLkNvAgoJPX4-fPIIg4rKfFl5TlgGQpaTQFB4svhKmQ242pKdA">kat5-users-unsubscribe@xxxxxxx</a>



Your use of Yahoo! Groups is subject to <a href="http://docs.yahoo.com/info/terms/";>http://docs.yahoo.com/info/terms/</a>




To unsubscribe from this group, send an email to:
<a
href="/group/kat5-users/post?postID=kVROHFRuYkEJrxESalpHz9exG4-kPgqJS9-czK3LLdVtX2NIFLkNvAgoJPX4-fPIIg4rKfFl5TlgGQpaTQFB4svhKmQ242pKdA">kat5-users-unsubscribe@xxxxxxx</a>



Your use of Yahoo! Groups is subject to <a href="http://docs.yahoo.com/info/terms/";>http://docs.yahoo.com/info/terms/</a>


To unsubscribe from this group, send an email to:
<a
href="/group/kat5-users/post?postID=kVROHFRuYkEJrxESalpHz9exG4-kPgqJS9-czK3LLdVtX2NIFLkNvAgoJPX4-fPIIg4rKfFl5TlgGQpaTQFB4svhKmQ242pKdA">kat5-users-unsubscribe@xxxxxxx</a>



Your use of Yahoo! Groups is subject to <a href="http://docs.yahoo.com/info/terms/";>http://docs.yahoo.com/info/terms/</a>