RE: Re: Knekt KAT5?

[Tony Butler]

Errr....mmmm... I'm not quite sure. Look (view as fixed font plz):

-------VIDEO-----------------
/ \
DVD --------AUDIO------ I ----ZONE1---- S ---ZONE1---- Kitchen
VIDEO ------AUDIO------ N ----ZONE2---- W ---ZONE2---- Lounge
Tuner ------AUDIO------ T " 3 I " 3 Bedroom
Radio ------AUDIO------ E " 4 T " 4 etc
Jukebox ----AUDIO------ R " 5 C " 5
SKY --------AUDIO------ S -----etc----- H etc
etc E
K
T


Ie, the video output of the DVD is connected to the
Bugger. Nope that won't work.
The audio from the DVD can be routed anywhere because say I select
intersekt zone 2, switch automatically routes that to zone2 - lounge.
But the video is plumbed into input 1 on the switch.
Pants.

There's probably a solution somewhere based on 2 switches, but I can't
be arsed ATM. Wait until I get the switch eh? :)
The question remains though: Do you think it will be possible to
program the switch such that a scart trigger on input 1 can cause it to
switch, say output 1, to display whatever is on input 1?
Outside my dumb ideas, this could be useful to auto switch your TV to
the CCTV input when someone is detected at the door - as long as the
CCTV will generate the required SCART signals..

I have several 'zones' already Linn'ed up, so I wanted to stick to a
single means of switching sources rather than having something for A
sources and something else for V sources.
Of course if the RCU's would interface to your switch, then I just ditch
the intersekt and away we go :-)
Or if I could turn back time, I would save myself a fortune by not
buying the Linn stuff & just wait for your switch to arrive :{

Cheers,

Tony
> -----Original Message-----
> From: Keith Doxey [mailto:<a
href="/group/kat5-users/post?postID=zeSH84xSk32EU6jGvF9pN3vMHyCP618nrVLHC-Yfdn2pn_VXXtgg5wNI4868VYeXAc1ESBlOkFoStmZhGw">kat5users@d...</a>]
> Sent: 15 February 2002 13:38
> To: <a
href="/group/kat5-users/post?postID=l1vODDRU1-xBzbUgAGUXBrIcpMS-VvOonJ0z6f2Npm-gfKKFNyDbrUA5_zrgExdErvyJQT-32AH5zoDxu_8bAbms9fiT">kat5-users@xxxxxxx</a>
> Subject: RE: [KAT5] Re: Knekt KAT5?
>
>
> Hi Tony,
>
> I *think* I get it now....
>
> You want to use the KAT5 switch so that you can have ANY of
> your AV sources routed to <Room_Y> but in the event of
> Intersekt Zone_X being active you want to select a DEFAULT
> source for Room_Y taking the Audio from <Input_X> and Video
> from wherever the DVD was connected.
>
> If you didnt want to select alternative Video sources then
> you might as well use vanilla KAT5 without the switcher.
>
> I personally think you are over-complicating things as the
> KAT5 switcher will be able to route everything by itself if
> you can find a way of sending the commands to it. You could
> then keep the Intersekt as a high end Audio system in the
> main AV location.
>
> Keith
>
> -----Original Message-----
> From: Tony Butler [mailto:<a
href="/group/kat5-users/post?postID=DtGdAOM4APiQrH6toVxUDruqk5PlJ4JheznTxOm5PxYLy46P18sbccdJHd60GBJ1vY2vycUaVGFSkVBU">tony@a...</a>]
> Sent: 15 February 2002 13:20
> To: <a
href="/group/kat5-users/post?postID=l1vODDRU1-xBzbUgAGUXBrIcpMS-VvOonJ0z6f2Npm-gfKKFNyDbrUA5_zrgExdErvyJQT-32AH5zoDxu_8bAbms9fiT">kat5-users@xxxxxxx</a>
> Subject: RE: [KAT5] Re: Knekt KAT5?
>
>
> > Hi Tony,
> >
> > I'm confused :-(
> >
> > This is what I dont get....
> > "could your switch be programmed such that having received a
SCART
> > trigger on input X, it would always automatically output that to
> > output Y" ...if it ALWAYS routes X to Y then there is no
> point having
> > a switch.
> >
> > The Intersekt only handles Audio, how will you select which Video
> > source you want, or are you saying "I select <AUDIO 1>
on Intersekt
> > for <Zone3> therefore I want the KAT5 Switch to select
> <AVSource1> and
> > Route it to <Zone3>".
>
> Yes, that's exactly what I'm thinking. ATM, I have intersekt
> piping DVD audio around the house, Yamaha AC3 amp doing the
> duty for the video signals &amp; AC-3 audio, and by connecting
> the DVD to the video, I can watch DVD in the bedroom on
> crappy RF. I want to replace RF with KAT5.
>
> > If so, and assuming you built a reliable audio detection
interface,
> > how will you differentiate between Audio from <Audio1> or
<Audio3> ?
>
> I don't need to.
> If I select DVD to play in the bedroom, then the intersekt
> will output the DVD audio to the bedroom zone. If I then
> decide to listen to the radio in the bedroom, it will output
> the radio to the bedroom zone. Either way, the input on your
> switch should be routed to what it knows as the bedroom zone.
> Each output zone on the intersekt would be connected to a
> different input on the KAT5 switch. It is the intersekt that
> will differentiate between the various audio sources. The
> switch just needs to know that input 1 always goes to output
> 1, input 2 to output 2 etc....
>
> Or am I missing something here?
>
>
> Cheers,
>
>
> Tony
>
>
>
> To unsubscribe from this group, send an email to:
> <a
href="/group/kat5-users/post?postID=Q-qKecCimEO1O1vbZOyad-QN8N4SriiFx1PKu-0rtK18oc80QvooVv800bSpFt8Fgsh46DFH2DI0LezGDaOaG0FhJTrS7_Bo">kat5-users-unsubscribe@xxxxxxx</a>
>
>
>
> Your use of Yahoo! Groups is subject to
> <a href="http://docs.yahoo.com/info/terms/";>http://docs.yahoo.com/info/terms/</a>
>
>
>
> ------------------------
> Yahoo! Groups Sponsor ---------------------~--> Sponsored by
> VeriSign - The Value of Trust Do you need to encrypt all your
> online transactions? Find the perfect solution in this FREE
> Guide from VeriSign.
> <a href="http://us.click.yahoo.com/vCuuSA/UdiDAA/yigFAA";>http://us.click.yahoo.com/vCuuSA/UdiDAA/yigFAA</a>>
/26EolB/TM
>
>
> --------------------------------------------------------------
> -------~->
>
> To unsubscribe from this group, send an email to:
> <a
href="/group/kat5-users/post?postID=Q-qKecCimEO1O1vbZOyad-QN8N4SriiFx1PKu-0rtK18oc80QvooVv800bSpFt8Fgsh46DFH2DI0LezGDaOaG0FhJTrS7_Bo">kat5-users-unsubscribe@xxxxxxx</a>
>
>
>
> Your use of Yahoo! Groups is subject to
> <a href="http://docs.yahoo.com/info/terms/";>http://docs.yahoo.com/info/terms/</a>
>
>