Re: Need help with LSDI 4000 Line Sharing Device #2

[woodythdog <woodythdog@xxxxxxxxxxx>]

10years to late but this info may help

Model 4000/8000 Programming:
CNG OFF

LONG 1			WAIT FOR TONE
000000#			WAIT FOR TONE
LONG 6			WAIT FOR TONE
#				WAIT FOR TONE
LONG 7			WAIT FOR TONE
0200				WAIT FOR TONE
HANG UP


CNG ON

LONG 1			WAIT FOR TONE
000000#			WAIT FOR TONE
LONG 6			WAIT FOR TONE
8				HANG UP
HANG UP

ACCEPT DISTINCTIVE RINGING â?? DEVICE 2

LONG 1			WAIT FOR TONE
000000#			WAIT FOR TONE
LONG 0			WAIT FOR TONE
1201				WAIT FOR TONE
HANG UP

ACCEPT DISTINCTIVE RINGING â?? DEVICE 3

LONG 1			WAIT FOR TONE
000000#			WAIT FOR TONE
LONG 0			WAIT FOR TONE
1231				WAIT FOR TONE
HANG UP


TELCO ANSWERING SERVICE
(Note: Telco answering service works in passive mode only. Once the TC4000 is programmed for passive mode, no remote programming is possible.)

LONG 1			WAIT FOR TONE
000000#			WAIT FOR TONE
LONG 6			WAIT FOR TONE
HANG UP

CALL DISPLAY
(Note: Fax rings the phone, the caller ID is displayed, and then call goes to the Fax).

LONG 1			WAIT FOR TONE
000000#			WAIT FOR TONE
LONG 0			WAIT FOR TONE
1002				WAIT FOR TONE
LONG #			WAIT FOR TONE
4514				WAIT FOR TONE
LONG 8			WAIT FOR TONE
4000				WAIT FOR TONE
HANG UP

CALL DISPLAY PROGRAMMING ON 4000P
LONG 1			WAIT FOR TONE
000000#			WAIT FOR TONE
LONG 0			WAIT FOR TONE
3002				WAIT FOR TONE
LONG #			WAIT FOR TONE
4514				HANG UP

CHANGE PORT 1 ANSWERING TO 20 RINGS

LONG 1			WAIT FOR TONE
000000#			WAIT FOR TONE
LONG 5			WAIT FOR TONE
***0				WAIT FOR TONE
HANG UP

CHANGE PORT 2 ANSWERING TO 10 RINGS

LONG 1			WAIT FOR TONE
000000#			WAIT FOR TONE
LONG 5			WAIT FOR TONE
0000				WAIT FOR TONE
HANG UP

CHANGING PORT ADDRESSES
(EXAMPLE: FROM 11 TO 21, ETC.)
LONG 1							WAIT FOR TONE
000000#							WAIT FOR TONE
LONG 4							WAIT FOR TONE
OLD ADDRESS (e.g., 11 for PORT1)		WAIT FOR TONE
NEW ADDRESS (e.g., 21# for PORT1)		WAIT FOR TONE
LONG 4							WAIT FOR TONE
NEXT OLD AND NEW ADDRESS OR HANG UP








CHANGING PORT ANSWERING ASSIGNMENT

LONG 1							WAIT FOR TONE
000000#							WAIT FOR TONE
LONG 3							WAIT FOR TONE
1419 (FOR PORT 1)					WAIT FOR TONE OR
2409 (FOR PORT 2)					WAIT FOR TONE OR
3409 (FOR PORT 3)					WAIT FOR TONE OR
4409 (FOR PORT 4)					WAIT FOR TONE
HANG UP


INTERCOM MODE
(NOTE: TO ACCESS PORTS, SIMPLY DIAL THE PORT ADDESS)

LONG 1							WAIT FOR TONE
000000#							WAIT FOR TONE
LONG 6							WAIT FOR TONE
9								WAIT FOR TONE
HANG UP

DELAY IN ANSWERING
(Note: This programming is ideal when there are two phones each in separate location. One phone is connected to the wall plate and another connected to the 4000 Port 1. When a call come in, phone connected to the wall plate will ring first so many numbers of times depending on the programming before the switch picks up the call.)

LONG 1							WAIT FOR TONE
000000#							WAIT FOR TONE
LONG 6							WAIT FOR TONE
LONG 4							WAIT FOR TONE
(NOTE: IF DEVICE HAS CNG ON AND WANT TO ENABLE CNG OFF.)
LONG 7                                  WAIT FOR TONE
200                                     WAIT FOR TONE
LONG #							WAIT FOR TONE
5034	(APPROX. 15.5 SECS ~ 4 +/- RINGS)	WAIT FOR TONE OR
5044 (APPROX. 20.5 SECS ~ 5 +/- RINGS)	WAIT FOR TONE OR
5054 (APPROX. 25.5 SECS ~ 6 +/- RINGS)	WAIT FOR TONE
HANG UP






ENABLE TOLL RESTRICTION
(NOTE: THIS PREVENTS ANY 1-XXX-XXX-XXX CALLS. TO OVERRIDE RESTRICTION, DIAL 796, THEN 1-XXX-XXX-XXX).

LONG 1							WAIT FOR TONE
000000#							WAIT FOR TONE
LONG *							WAIT FOR TONE
000000#							WAIT FOR TONE
LONG 0							WAIT FOR TONE
1951								WAIT FOR TONE
HANG UP