[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]

Re: Central Vac overload



He's been told, many time here but doesn't seems to understand that.


"B Fuhrmann" <b-fuhrmann-usenet@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:5YKdnQyvO-OeEynWnZ2dnUVZ_judnZ2d@xxxxxxxxxxxxx
Current sensing (for slightly low current, fans spinning air take less power
than ones moving air) is one way but is likely to be more expensive than a
vane on a switch to watch for no air flow on the exhaust.
Another possibility is to look for a lower pressure (higher vacuum) just
ahead of the main unit.



> Thanks, Art, for summing it up so well.   I wouldn't have asked the
> question
> if it wasn't a problem.  I was downstairs, right near the vac cabinet so I
> could hear the motor noise change, but my wife, vacuuming upstairs,
> didn't.
>
> Based on some other comments, I need to do some testing, especially
> current
> draw, to see what's really happening when the vacuum becomes clogged.




comp.home.automation Main Index | comp.home.automation Thread Index | comp.home.automation Home | Archives Home