Re: Anyone moved to LED Lighting?

["Josepi" <JRM@xxxxxxxxxxxx>]

Am I correct in assuming you have over 200 fixtures for these LED lights or
is there some other format used?


Testing has shown white LEDs to be less efficient than CFLs and hardly much
more efficient than incandescent lighting. Apparently there was a technology
change a few years back that I am not familair with. I believe these use a
phophourescent screen technology to re-emit the light in the colour desired.



"John Perry" <jpnews@xxxxxxxxxxxxxxxxxxx> wrote in message
news:ip26g5pbol5n8ackjlh2ta8v360p28tk3n@xxxxxxxxxx
>I have tried a range of GU 10 LEDs.
>
> 16 LED units using 2W, and totally inadequate.
>
> 48 LED units imported from China; they had a greenish hue, but
> inadequate brightness and too green/blue.
>
> 60 LED warm lights that give the right colour balance, but not really
> bright enough. No failures in 2 years, we use some for background
> lighting.
>
> 60 LED daylight units that are too white/bright. No failures in 2
> years.
>
> 78 LED warm units, these are easily bright enough and equivalent to
> 20W halogens.  We use around 40 of these.
>
> 78 LED daylight units, again easily bright enough, but too white and
> un-natural.
>
> 12 LED SMD warm; these are excellent, very bright and we use about 40
> of these.  These are slightly brighter and whiter than the 78 LED warm
> units.
>
> 12 LED SMD daylight; these are excellent, very bright and we use them
> in the kitchen.
>
> 16 LED colour changing; we use these at Christmas time for fun.
>
> No interference with X-10 so far, but I think they are killing the
> signal between my wireless weather station and external sensors.
>
> Sorry for the delay in replying.
>
> The units barely get warm, and use less energy than CFLs as the CFLs
> get hot.
>
> All GU10s are in fire cowls, but covered with fibreglass with no
> cut-outs as required for halogen.  If 50W halogen units are put in our
> housings, we would have a serious fire risk.
>
>
> On Sat, 31 Oct 2009 00:26:07 -0400, "Josepi" <JRM@xxxxxxxxxxxx> wrote:
>
>>Do you have any efficiency specs onthese unit you are using? Some previous
>>test found white LEDS to be much less efficient than CFLs. IN fact people
>>found white LEDS to be less inefficient than incandescent bulbs.
>>
>> I understand some new technologies have changed that in the last few
>> years.
>>I would be interested in what technology you are using and what the
>>colour,
>>brightness and efficiencies are if you are aware. You seem happy with them
>>so they must be half decent.
>>
>>
>>"John Perry" <jpnews@xxxxxxxxxxxxxxxxxxx> wrote in message
>>news:on4me5plinjq3h212fa2gq9eebd5gk5pt3@xxxxxxxxxx
>>> Reason is, no cost saving to control them.  I have tries CFLs, but
>>> they get too warm; the LEDs run virtually cold.
>>
>>> On Mon, 5 Oct 2009 12:20:36 -0400, "Robert L Bass"
>>> <Sales@xxxxxxxxxxxxxxxxxxxxx> wrote:
>>>>From the gentleman's first post: "I'm very impressed with the results
>>>>and
>>>>have
>>>>decided not to use X-10 to control them."
>>>
>>>>"Robert Green" wrote:
>>>>> Sure.  Have you tried them with X-10?...
>>>>
>>
> --
> John Perry