[Message Prev][Message Next][Thread Prev][Thread Next][Message Index][Thread Index]
Re: Switch Conversion???
Jeff Volp wrote:
> What you may have is an old GE low-voltage installation. The place where I
> worked back East had that type of system. The rockers were horizontal -
> maybe 5/8" by 1 1/4" if I remember right. There was no local click or snap
> when the switch was pressed, but I could hear a click from the relay in the
> ceiling. As I recall, that system was discontinued years ago, and it has
> become a retrofit nightmare as the components wear out.
>
> If that truly is a low-voltage system, then the wiring is apt to be
> low-voltage too. Somehow you will have to deal with that. I am not aware
> of any home automation equipment that will work with that kind of switch.
>
> Jeff
I'm postive that if anyone could "cobble" something together to make
*any* lighting system work with X-10, it would be someone in *this*
group. :-)
comp.home.automation Main Index |
comp.home.automation Thread Index |
comp.home.automation Home |
Archives Home